Sorry sir, but at this level anybody that cannot understand ordinary Van ness, I don't know what the company wants to do with that person.Quote:
Originally Posted by GodwinGO
Printable View
Sorry sir, but at this level anybody that cannot understand ordinary Van ness, I don't know what the company wants to do with that person.Quote:
Originally Posted by GodwinGO
Let me use this oppurtunity to thank Triple-C and Dhamy09 or so (sorry if i misspelt it). I tell you your post(s) on your Petroleum "Exams" experience saved me alot of time. I was busy reading extraneous materials on corrosion, erosion, water treatment even organic chemistry!!! (Unemployment is very bad) because i no wan finish last#Undullmode. I thank God you rescued me from my folly before hand.
The guy that claims to have an easy to understand "thermodynamics text" shouldve just uploaded it here now, thats if he really has it. Why are you trying to make a quick buck? Dont bother trying to respond there are already a replete of posts here that have truly conveyed my deepest and genuine thoughts about you. Since we are in a holy, Jacking mode I wouldnt call you an *expletive*, *expletive* expletive* human being.
By the way, how much do you think they'd refund someone whose house address is Belissmo hotels, New Road, Lekki sef?
i can't remember the last time i jacked like this.
For guys in the UK: I got a mail from Chevron that there'll be a centre in the UK and that venue and time will be communicated soon. If you haven't sent a request for change of venue, you can do that ASAP. God bless you.
hello house, thanks to you all for your support thus far.... i really appreciate your comments and ideas shared. plz, i got a mail for instrumentation and control skill test while i applied for facility/mechanical position. what do you think i can do? or how best can you advise me to prepared cos am not familiar with instrumentation and control subjects? Thanks in anticipation for your replies..............................
I'm telling you... The competition is sure going to be tough coz all the guys that made it through are confirmed gurus [in their own right] and everyone is preparing hard [Nobody wan carry last after coming thus far]. Love the challenge. Let's go have fun on Thursday guys + ladies...Quote:
Originally Posted by KOOLGIANT
If you actually read Mech. Engr. or any related course in school then it's almost of no point going in for the Instr. & Control Position. It's as difficult as it is for pure Electrical/Electronics guys, people from other unrelated disciplines. I think it's best to notify the people responsible [Justin/Bibian] about the mistake because it might have been a a typographical error [or copy and error] since they basically sent the same thing to everyone, the only difference was the Name, Position and Time/Date of the test... I seriously doubt that Chevron will intentionally use their hands to change someone's preferred Position choice. This is not Naija University system where you apply for Medicine and Surgery but receive admission offer for Botanical Sciences...Quote:
Originally Posted by dannydeb
Thanks bro, will try to contact bibian on monday to see how best she can help me out................ How preparations for the skill test?
Still praying for guidance and direction as to what to read coz the scope is really broad and preparation time is limited. I heard it's an exam oh, not test. 2 Hours, 18 questions to answer 12. I.e. 20 minutes per question so you can imagine what each questions entails. I just hope it will be purely calculation like for the Pet guys. Na God hand we dey oh!!!!Quote:
Originally Posted by dannydeb
I really love this forum, and I have gained a lot from you guys in the forum. I was also invited for facilities engineering, instrumentation and control position, I can only pray for Gods favour.
Did anyone get any reply after sending his acknowledgement mail and indicating his availability?
Meanwhile, see the tension building up here!Dat means the 30th will be ...hmmm,i reserve my comment!
hello,from various comments its clear,that its calculations...that makes it simpler.take a book that has the basic or fundamentals about the section u want to do,learn it,for me,i'm reading theraja and i'm half way thru it with my busy life,i still find time to read,dont be afraid...its all come down to formulas n basic addition and substration.dont let anyone play on ur head or mind,that there is one book on this or that and you should buy it.if he really wants to give u,he will send it to you without delay,some of the materials i have i give freely becos a friend gave me,without any charge.so be wise.....
@ Triple C the formula sheet you received or used was it only formulas relating to petroleum engineering or formulas for all fields be it electrical mechanical and the likes. Cos for process engineering the formulas have great grand children and its only the Grace of God that you can use to cram all of them.
your response will be duly appreciated
thanks
are we all writing by 3:00pm on thursday? Pls state ur time and discipline/position: F.E Mech/Reliability/Subsea.
are we all writing by 3:00pm on thursday? Pls state ur time and discipline/position: F.E Mech/Reliability/Subsea.
@ Akan A1, I hail oo...
Thanks for your materials. Shortcut indeed, simple and straight to the point
Quote:
Originally Posted by smartpue
@smartpue, whoa!!! so you have covered half of Theraja.Infact, you have intimidated some of us. Are u for electrical or instrumentation? Goodluck to everyone.
I hail pass Sir! I am loyal....Quote:
Originally Posted by proton08
As 4 the Exam timetable, lol. Instrumentation & control, alongside Electrical are all writing by 12 noon. Mech/Reliability/Subsea are all writing by 3pm. I'm not sure which group is writing by 9am if there's a 9am group. I think similar categories were grouped together cause I feel it will be the same questions for everyone writing in that time band. Just what I think though....
@Triple C
Please could you kindly give us more details on the formula sheet provided. Was it just formulas or formulas and conversion rates also? Still trying to figure out what to cram coz those conversion rates are too many to memorize in just a few days.... Thanks Boss!!!!
really... Sorry if i did... But its just that i need the job and if reading it will give me,why not.
there is nothing like give someone a helping hand...still have more,but time,book size,and uploading them...
Guys! Guys! Guys! Chill out! You guys are making this look as if it is CHAMPIONS LEAGUE! Relax!Attachment 5145Attachment 5145
for those doing anything relating to thermodynamics,fluid,heat,etc... I have a book or two for u to read... But b4 i got it,i paid for it,from my friend,he price was simple,just send me a mail and say 'you will pass all your interviews and jobs will be lookin for u' which i did to get.
So u do thesame...remember do your best and let God do the rest. The email is [email protected]
i will send them later to 9th or early 2morow,depending on network...
for those doing anything relating to thermodynamics,fluid,heat,etc... I have a book or two for u to read... But b4 i got it,i paid for it,from my friend,he price was simple,just send me a mail and say 'you will pass all your interviews and jobs will be lookin for u' which i did to get.
So u do thesame...remember do your best and let God do the rest. The email is [email protected]
i will send them later to 9th or early 2morow,depending on network...
The folks writing 9am are chemical/process folks.
For Electrical and Instrumentation, pls is there any difference is the skill tests?
nigerian can be really funny... Just a simple prayer for me b4 i send material n some are copying and ,back to me...
Anyway,i will send the material around 11.45pm when i finish my reading... Good 9th for now.
read everything for anything..
What is happening i have not received any mail for skill test FE (mech/subsea/reliability). Can we go for the test without an invitation mail?
@triple c, i sent u a pm
Na wa o. I've just been reading orisirisi. I don't even know where to concentrate on. Abeg, to those that wrote last week, is the formula sheet specifically for each position or general? We shall all succeed by God's grace. Amen.
You can go. Anything is possible to them that believe. Am sure they are expecting someone like you already.
You can go. Anything is possible to them that believe. Am sure they are expecting someone like you already.Quote:
Originally Posted by muyee200
Whom are you asking?Quote:
Originally Posted by Geeeer
Fellow Chemical Engrs,walai ds our course is damn broad n formulae plenty. My advice is,learn the root/crude basic equations,the rest can b generatd and also d major conversion factors. I'm havin a challenge of meetin up wt d 9am time(8:30am actually)being a nonLagosian,dnt knw my way arnd Lag..nw ds early morning 'Lekki' waka.
Take an Ajah bound Bus from CMS, Obalende or Oshodi [BRT also ply these 3 routes]. Stop at New Road Bus-Stop, it's after Igbo Efon Roundabout and before Chevron Roundabout. After Chevron RBT is the 2nd/Chevron Toll-gate just in case you pass without noticing you know to turn back. Safe trip...Quote:
Originally Posted by odimskay
@Akan..10k Man
The Great Jacking...death by Van Ness and Smith :( Na wa
Remember to tell the bus conductor where you are going lest he takes you beyond your intended destination.Quote:
Originally Posted by odimskay
@triple-c, i sent u a pm, pls respond asap. thanx.
