Topic: Career development with the right skills (oil&gas, telecoms and ict)

Radio Network Planning

Radio Network Planning broadens your horizon on the core of Wireless Networking as covered in CWNA curriculum and GSM Engineering. It gives you a complete understanding of wireless networking and communication.

Course content:
Wireless LAN and its applications.
Radio Frequenc...y (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathemati...cs.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals
Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
Features of GSM and GPRS network Architecture.
GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
Channels on the air interface (Physical and Logical channels).
Radio interference optimization (power control and interference).
Call setup, Hand over and Call termination.
Introduction GPRS.
Introduction UMTS.

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of wireless systems network planning and Radio frequency (RF) plus GSM engineering gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Base Station Field Support Engineering Training!!!

This course exposes to you the core of Network planning and Engineering, Microwave Transmission & wireless network planning and GSM Engineering. Its covers the entire CCNA, CWNA and GSM Engineering curriculum. It’s well structured to suit your professional expectations.
Course content:
Network Planning and Engineering (CCNA)
Internetworking
Introduction t...o TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Network Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Microwave Transmission & Wireless Networking
Wireless LAN and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

GSM Engineering
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• Introduction GPRS.
• Introduction UMTS.
Duration
Corporate training 15 Days
Individual training 3 mths (weekdays)
Individual training 6 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Field support Engineer (Transmission and Networking) is the perfect course for professionals and aspiring professionals in the industry. It’s also one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay packageand benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Microwave Transmissions and Network Engineering

This course covers the principle of microwave transmission and networking that will lead one to being a Certified Wireless Network Administrator (CWNA) and also the very foundation of wired networking. At the end of this program you are expected to fully understand the how to design, plan, develop and manage a wireless network ranging from SOHO, PTP, PTMP and WISP. And also know the various types of Radio Frequency (RF) antennas and when to use one and the security of her wireless networks using any of the many wireless network security policies. In addition to that you will as well be thought the basis in systems networking.

Course content:
Introductions to networks
OSI model
Networking topologies, connectors and IEEE wiring standards
Ethernet specifications
Networking devices
IP addressing
Introduction to network switches
LAN networks and introduction to VLAN
Security, management and optimization
Wireless LANs and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

Duration
Corporate training 7 Days
Individual training 6 Weeks (weekdays)
Individual training 12 Weeks (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of Microwave Transmission and Networking gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

PORT HARCOURT HSE (HEALTH SAFETY AND ENVIRONMENT) MONTHLY TRAINING!!!!

ARE YOU;
• Seeking a career in the Oil and Gas industry
• Seeking industrial attachment into the Oil and Gas industry
• Seeking a career change in the Oil and Gas industry
• Seeking a RIG/Offshore job
Finally the opportunity to get trained in the Oil and Gas most wanted certification is here fro you.

INTRODUCTION:
If you are an undergraduate, a job seeker or a working professional desiring a career in the oil and gas industry, this is your opportunity to get trained in the oil and gas most wanted Certification. Do not miss this golden opportunity.
Speakers at the event are certified HSE professionals with seasoned oil and gas industrial experience. Come and hear from the horse’s mouth.

WHAT’S HSE?
HSE stands for Health Safety and Environment, also known as Occupational Health Safety and Environment etc. HSE in oil and gas is simply the way and manner Oil and Gas personnel conduct themselves safely in an oil and gas environment or RIG platform. These conducts varies depending on the nature of work and the platform too.
This training and certification is mandatory for all personnel in the oil and gas industry irrespective of your career path.
The training focuses on the general HSE which is mandatory for anybody that desires a career in the oil and gas industry.


HOW IMPORTANT IS HSE TRAINING?
HSE is very important because it gives you an edge over others. It makes you have broad career and also stand you out as a professional. For instance one that studied accounting with HSE training and certification can apply for jobs meant for accountants and HSE supervisors, officer and watcher.
HSE is for everyone that has interest in working with Oil and Gas Companies, because without this HSE training you won’t be allowed into any oil and gas plant. Its importance cannot be over emphasized.

WHO IS QUALIFIED TO ATTEND THIS HSE TRAINING?
Everyone is qualified for the training, students that seek Industrial attachment, coppers, job seekers and the working class. If you desire a job with the oil and gas companies this training is for you.
Also corporate bodies in and around Rivers state, government ministries and commission that desire high level of HSE best practices in their work environment, factory and office can sponsor their staff for this training.

WHAT’S THE BENEFIT OF THIS TRAINING?
The benefit includes but not limited to the following;

- The certificate that this training will provide will make you highly employable in the oil and gas industries.
- The training and certification defines you as a professional and gives you an edge over others.
- HSE training and certification gives you a broader career approach, because HSE certified personnel can function in different capacities in the oil and gas industries.
- Finally and also very important, we render free Job consultancy to you for a year.

WHEN IS THE TRAINING HOLDING AND WHERE?
DATE: 24rd & 26th OCT, 2013
TIME: 9am – 4pm Daily
VENUE: Suit 216 Eugene Plaza, 14 Woji road rumuogba Port Harcourt


HOW MUCH IS THE TRAINING?
PRICE: 20,000
(PAYMENT COVERS FOR THE TRAINING, CERTIFICATE & ONE Yr. JOB CONSULTANCY)

BOOKING:
For your seat booking and inquiries call Isaac (07035816455) or PING (23268970)

PORT HARCOURT HSE (HEALTH SAFETY AND ENVIRONMENT) MONTHLY TRAINING!!!!

ARE YOU;
• Seeking a career in the Oil and Gas industry
• Seeking industrial attachment into the Oil and Gas industry
• Seeking a career change in the Oil and Gas industry
• Seeking a RIG/Offshore job
Finally the opportunity to get trained in the Oil and Gas most wanted certification is here fro you.

INTRODUCTION:
If you are an undergraduate, a job seeker or a working professional desiring a career in the oil and gas industry, this is your opportunity to get trained in the oil and gas most wanted Certification. Do not miss this golden opportunity.
Speakers at the event are certified HSE professionals with seasoned oil and gas industrial experience. Come and hear from the horse’s mouth.

WHAT’S HSE?
HSE stands for Health Safety and Environment, also known as Occupational Health Safety and Environment etc. HSE in oil and gas is simply the way and manner Oil and Gas personnel conduct themselves safely in an oil and gas environment or RIG platform. These conducts varies depending on the nature of work and the platform too.
This training and certification is mandatory for all personnel in the oil and gas industry irrespective of your career path.
The training focuses on the general HSE which is mandatory for anybody that desires a career in the oil and gas industry.

HOW IMPORTANT IS HSE TRAINING?
HSE is very important because it gives you an edge over others. It makes you have broad career and also stand you out as a professional. For instance one that studied accounting with HSE training and certification can apply for jobs meant for accountants and HSE supervisors, officer and watcher.
HSE is for everyone that has interest in working with Oil and Gas Companies, because without this HSE training you won’t be allowed into any oil and gas plant. Its importance cannot be over emphasized.

WHO IS QUALIFIED TO ATTEND THIS HSE TRAINING?
Everyone is qualified for the training, students that seek Industrial attachment, coppers, job seekers and the working class. If you desire a job with the oil and gas companies this training is for you.
Also corporate bodies in and around Rivers state, government ministries and commission that desire high level of HSE best practices in their work environment, factory and office can sponsor their staff for this training.

WHAT’S THE BENEFIT OF THIS TRAINING?
The benefit includes but not limited to the following;

- The certificate that this training will provide will make you highly employable in the oil and gas industries.
- The training and certification defines you as a professional and gives you an edge over others.
- HSE training and certification gives you a broader career approach, because HSE certified personnel can function in different capacities in the oil and gas industries.
- Finally and also very important, we render free Job consultancy to you for a year.

WHEN IS THE TRAINING HOLDING AND WHERE?
DATE: 24rd & 26th OCT, 2013
TIME: 9am – 4pm Daily
VENUE: Suit 216 Eugene Plaza, 14 Woji road rumuogba Port Harcourt

HOW MUCH IS THE TRAINING?
PRICE: 20,000
(PAYMENT COVERS FOR THE TRAINING, CERTIFICATE & ONE Yr. JOB CONSULTANCY)

BOOKING:
For your seat booking and inquiries call Isaac (07035816455) or PING (23268970)

Call 07035816455 for seat booking.

For your seat booking and inquiries call Isaac (07035816455) or PING (23268970)

For your seat booking and inquiries call Isaac (07035816455) or PING (23268970)

For your seat booking and inquiries call Isaac (07035816455, 08180178962) or PING (23268970)

****A MARRIED MAN IN THE HANDS OF ANOTHER WOMAN*****
A famous motivational speaker who is a married man said to an audience loudly:
“The best years of my life were spent in the arms of a woman who I love so much and who wasn't my wife. “
Audience was in shock and silence. The speaker explained with a smile: "She was my mother"
A big round of applause & laughter came from the audience. A very daring husband tried to crack the joke this at home.
After dinner, he said loudly to his wife in the kitchen:
“Best years of my life were spent in the arms of a woman, who wasn't my wife”.
He stopped for a moment, trying to say the second line of that speaker.
By the time he gained his senses, he was on a hospital bed, recovering from the burns of boiling water from his wife!!!
Moral: Don't Copy, if you can't very well.