Topic: Career development with the right skills (oil&gas, telecoms and ict)

Network Planning And Engineering

This course covers the full CISCO curriculum for the Cisco Certified Network Associate (CCNA). At the end of this course the candidate should master the principles of routing and switching and configuration of Cisco routers and switches, the design, development and maintenance of Local Area Network (LAN) and its security.
This course consists of se...veral practical sessions and students will be practicing with live Cisco routers and switches.

Course content:
Internetworking
Introduction to TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Duration
Corporate training 5 Days
Individual training 4 Weeks (weekdays)
Individual training 8 Weeks (Weekends)
Learning Process Flexible
Cost #30,000 (PROMO PRICE)

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of Network planning and Engineering gives you an edge in the labor market. Writing the CCNA professional exam after this course is a plus as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

LOCATION
Suite 214 Eugene Plaza, 14 Woji Road Rumuoba Port Harcourt.

Radio Network Planning

Radio Network Planning broadens your horizon on the core of Wireless Networking as covered in CWNA curriculum and GSM Engineering. It gives you a complete understanding of wireless networking and communication.

Course content:
Wireless LAN and its applications.
Radio Frequenc...y (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathemati...cs.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals
Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
Features of GSM and GPRS network Architecture.
GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
Channels on the air interface (Physical and Logical channels).
Radio interference optimization (power control and interference).
Call setup, Hand over and Call termination.
Introduction GPRS.
Introduction UMTS.

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of wireless systems network planning and Radio frequency (RF) plus GSM engineering gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Data Communication Engineering


This is an amalgamation of our professional courses tailored to suit your need. It covers the following course curriculum;
Introduction to System Networking.
Introduction to Wireless Systems and Networks
Network Planning and Engineering
Microwave Transmissions & Wireless Network Planning
Microwave Transmissions and Network Engineering
GSM (Global System for Mobile Communication 2g to 3g)
3rd Generation (3G) Network Engineer
BTS Engineering

At the end of this training program it’s very unlikely to remain unemployed or at the same career level. It also comes with an optional internship program with any of the Telecoms Company or telecoms servicing companies.
Duration
Corporate training 1 mth
Individual training 6 mths (weekdays)
Learning Process Flexible

Who should attend
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Diploma in Data Communication Engineering is a hybrid course and is one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Telecommunication Engineering...

Telecommunication Engineering is one course that fully articulates all you need to know as a professional or aspiring professional in the industry with respect to GSM Engineering, 3G Network Engineering and BTS Engineering. It covers the entire course curriculum mentioned above.

Course content:
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• UMTS network architecture (UE, Node B, RNC, RNS, and UMTC etc)
• UMTS network interfaces (Uu, LuB, LuR, LuCS, LuPS etc)
• UMTS and UTRAN
• Introduction to Base Transceiver station (BTS).
• Main principle feature and characteristics of a BTS.
• BTS Cabinets structure, description and types.
• BTS hardware architecture and connection (SUM, TRX, ANY, ANX, BTSCA, Fan Unit, PSU, DC, Sub racks etc).
• BTS Ranges
• BTS configuration, Test and commissioning.
• Environmental compatibility (EMC)

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Telecommunication Engineering is a broad course, also one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur.
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Field Support Engineer Telecoms

Field Support Engineer Telecom is a broad course that envelops the features of Microwave transmission and BTS engineering. The course entails in the detail the curriculum covered in Microwave Transmission and Wireless network Planning and also BTS Engineering. This is a hybrid course designed for those with special interest in Telecommunication Engineering. At the end of this course the participant will be fully grounded in the principle of microwave transmission and BTS configuration and installation as outlined in the brochure.
Course content:
Microwave Transmission and Wireless network Planning
Wireless LAN and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

Base Transceiver Station (BTS) Engineering
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• Introduction GPRS.
• Introduction UMTS.
• Introduction to Base Transceiver station (BTS).
• Main principle feature and characteristics of a BTS.
• BTS Cabinets structure, description and types.
• BTS hardware architecture and connection (SUM, TRX, ANY, ANX, BTSCA, Fan Unit, PSU, DC, Sub racks etc).
• BTS Ranges
• BTS configuration, Test and commissioning.
• Environmental compatibility (EMC)
• BTS fault finding and troubleshooting
• Site visit.
Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Field Support Engineer Telecoms is a hybrid course and is one of the most sought after profession in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as self an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

BSS Field Support Engineering Training!!!

This course exposes to you the core of Network planning and Engineering, Microwave Transmission & wireless network planning and GSM Engineering. Its covers the entire CCNA, CWNA and GSM Engineering curriculum. It’s well structured to suit your professional expectations.
Course content:
Network Planning and Engineering (CCNA)
Internetworking
Introduction t...o TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Network Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Microwave Transmission & Wireless Networking
Wireless LAN and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

GSM Engineering
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• Introduction GPRS.
• Introduction UMTS.
Duration
Corporate training 15 Days
Individual training 3 mths (weekdays)
Individual training 6 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Field support Engineer (Transmission and Networking) is the perfect course for professionals and aspiring professionals in the industry. It’s also one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay packageand benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Wireless Systems and Network Engineering (CCNA & CWNA)
	This is one course that fuses the core details of networking and wireless networking together to give you a detailed understanding of networking. It covers the full curriculum of CCNA and CWNA and as such leads to the certification. Course content: CCNA CURRICULUM • Internetworking • Introduction to TCP/IP • Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP • Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM) • Managing a Cisco Internetwork • IP Routing (RIP &RIPv2) • Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF) • Layer 2 Switching and Spanning Tree Protocol (STP) • Virtual LANs (VLANs) • Security • Network Address Translation (NAT) • Cisco’s Wireless Technologies • Internet Protocol Version 6 (IPv6) • Wide Area Networks (WAN) CWNA CURRICULUM • Wireless LAN and its applications. • Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics. • Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO) • Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges) • Antennas and Accessories, Antenna categories and types, Antenna location and Installations. • Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance) • 802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management) • MAC and Physical Layers (RTS/CTS and Modulation) • WLAN set up and management (SOHO, PTP, PTMP and WISP) • Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput) • Wireless LAN Security and security policies. • Site Survey Fundamentals Duration Corporate training 10 Days Individual training 2 mths (weekdays) Individual training 4 mths (Weekends) Learning Process Flexible Who should attend? Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector. Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies. Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies. Self employed entrepreneur seeking for career advancement. Engineering and Science Students. Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT. Benefits Mastering the principle of wireless systems network planning & Radio frequency (RF) plus systems networking gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

ICT COURSES
1 CCNA 4 WEEKS ……. 30,000
2 CWNA 4 WEEKS ………..30,000
3 MCTS 3 WEEKS ……………30,000
4 MCITP SERVER 3 MONTHS ………………105,000
5 MCITP ENTERPRISE 4 MONTHS …………..120,000
6 PROJECT MANAGEMENT 4 WEEKS …………..52,500
7 ORACLE 10g & 11g
8 AUTO CAD 2D & 3D 3 WEEKS ……….30,000
9 COMPTIA A+
10 COMPUTER APPRECIATION 2 WEEKS …………15,000
11 GRAPHIC DESIGN (COREL DRAW) 2 WEEKS …………..7,500
12 WEB DESIGN (JAVA SCRIPT, HTML & CSS) 4 WEEKS ……..45,000

TELECOMS COURSES:

1 NETWORK PLANNING AND ENGINEERING 4 WEEKS ………. 30,000
2 GSM NETWORK ENGINEERING 3 WEEKS …………….30,000
3 3G NETWORK ENGINEERING 4 WEEKS ……………37,500
4 BTS ENGINEERING 6 WEEKS …………..60,000
5 BSS FIELD SUPPORT ENGINEER 3 MONTHS …………..90,000
6 FIELD SUPPORT ENGINEER TELECOMS 2 MONTHS ……….75,000
7 TELECOMS ENGINEERING 2 MONTHS ……………75,000
8 RADIO NETWORK ENGINEERING 2 MONTHS …………..60,000
9 DATA COMMUNICATION ENGINEERING 6 MONTHS ………150,000
10 WIRELESS SYSTEMS AND NETWORK ENGINEERING 2 MONTHS………… 60,0000
11 MICROWAVE (RF) TRANSMISSION & WIRELESS NETWORK PLANNING 4 WEEEKs……30,000

NOTE:
(i) Registration in Progress now.

For more information call 07035816455 or mail [email protected]
www.ht-engineering.net (Suite 216 Eugene Plaza, 14 Woji Road, Rumuoba Port Harcourt)
REMEMBER OUR 6 MONTHS TRAINING COMES WITH A JOB PLACEMENT…. Hurry Now Limited Seats Available.

Microwave Transmissions and Network Engineering

This course covers the principle of microwave transmission and networking that will lead one to being a Certified Wireless Network Administrator (CWNA) and also the very foundation of wired networking. At the end of this program you are expected to fully understand the how to design, plan, develop and manage a wireless network ranging from SOHO, PTP, PTMP and WISP. And also know the various types of Radio Frequency (RF) antennas and when to use one and the security of her wireless networks using any of the many wireless network security policies. In addition to that you will as well be thought the basis in systems networking.

Course content:
Introductions to networks
OSI model
Networking topologies, connectors and IEEE wiring standards
Ethernet specifications
Networking devices
IP addressing
Introduction to network switches
LAN networks and introduction to VLAN
Security, management and optimization
Wireless LANs and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

Duration
Corporate training 7 Days
Individual training 6 Weeks (weekdays)
Individual training 12 Weeks (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of Microwave Transmission and Networking gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Call now to book a class.

PORT HARCOURT HSE (HEALTH SAFETY AND ENVIRONMENT) MONTHLY TRAINING!!!!

ARE YOU;
• Seeking a career in the Oil and Gas industry
• Seeking industrial attachment into the Oil and Gas industry
• Seeking a career change in the Oil and Gas industry
• Seeking a RIG/Offshore job
Finally the opportunity to get trained in the Oil and Gas most wanted certification is here fro you.

INTRODUCTION:
If you are an undergraduate, a job seeker or a working professional desiring a career in the oil and gas industry, this is your opportunity to get trained in the oil and gas most wanted Certification. Do not miss this golden opportunity.
Speakers at the event are certified HSE professionals with seasoned oil and gas industrial experience. Come and hear from the horse’s mouth.

WHAT’S HSE?
HSE stands for Health Safety and Environment, also known as Occupational Health Safety and Environment etc. HSE in oil and gas is simply the way and manner Oil and Gas personnel conduct themselves safely in an oil and gas environment or RIG platform. These conducts varies depending on the nature of work and the platform too.
This training and certification is mandatory for all personnel in the oil and gas industry irrespective of your career path.
The training focuses on the general HSE which is mandatory for anybody that desires a career in the oil and gas industry.

HOW IMPORTANT IS HSE TRAINING?
HSE is very important because it gives you an edge over others. It makes you have broad career and also stand you out as a professional. For instance one that studied accounting with HSE training and certification can apply for jobs meant for accountants and HSE supervisors, officer and watcher.
HSE is for everyone that has interest in working with Oil and Gas Companies, because without this HSE training you won’t be allowed into any oil and gas plant. Its importance cannot be over emphasized.

WHO IS QUALIFIED TO ATTEND THIS HSE TRAINING?
Everyone is qualified for the training, students that seek Industrial attachment, coppers, job seekers and the working class. If you desire a job with the oil and gas companies this training is for you.
Also corporate bodies in and around Rivers state, government ministries and commission that desire high level of HSE best practices in their work environment, factory and office can sponsor their staff for this training.

WHAT’S THE BENEFIT OF THIS TRAINING?
The benefit includes but not limited to the following;

- The certificate that this training will provide will make you highly employable in the oil and gas industries.
- The training and certification defines you as a professional and gives you an edge over others.
- HSE training and certification gives you a broader career approach, because HSE certified personnel can function in different capacities in the oil and gas industries.
- Finally and also very important, we render free Job consultancy to you for a year.

WHEN IS THE TRAINING HOLDING AND WHERE?
DATE: 3rd & 5th OCT, 2013
TIME: 9am – 4pm Daily
VENUE: Suit 216 Eugene Plaza, 14 Woji road rumuogba Port Harcourt

HOW MUCH IS THE TRAINING?
PRICE: 20,000
(PAYMENT COVERS FOR THE TRAINING, CERTIFICATE & ONE Yr. JOB CONSULTANCY)

BOOKING:
For your seat booking and inquiries call Isaac (07035816455, 08180178962) or PING (23268970)
Email [email protected] website: www.ht-engineering.net