Topic: Radio Network Planning Engineers

Telecommunication Engineering

Telecommunication Engineering is one course that fully articulates all you need to know as a professional or aspiring professional in the industry with respect to GSM Engineering, 3G Network Engineering and BTS Engineering. It covers the entire course curriculum mentioned above.

Course content:
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• UMTS network architecture (UE, Node B, RNC, RNS, and UMTC etc)
• UMTS network interfaces (Uu, LuB, LuR, LuCS, LuPS etc)
• UMTS and UTRAN
• Introduction to Base Transceiver station (BTS).
• Main principle feature and characteristics of a BTS.
• BTS Cabinets structure, description and types.
• BTS hardware architecture and connection (SUM, TRX, ANY, ANX, BTSCA, Fan Unit, PSU, DC, Sub racks etc).
• BTS Ranges
• BTS configuration, Test and commissioning.
• Environmental compatibility (EMC)

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Telecommunication Engineering is a broad course, also one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur.
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact [email protected] or call +234 (0) 7035816455

Call now to book a class.

Get the skill and get the job.

Class in session.

Field Support Engineer

Field Support Engineer Telecom is a broad course that envelops the features of Microwave transmission and BTS engineering. The course entails in the detail the curriculum covered in Microwave Transmission and Wireless network Planning and also BTS Engineering. This is a hybrid course designed for those with special interest in Telecommunication Engineering. At the end of this course the participant will be fully grounded in the principle of microwave transmission and BTS configuration and installation as outlined in the brochure.
Course content:
Microwave Transmission and Wireless network Planning
Wireless LAN and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

Base Transceiver Station (BTS) Engineering
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• Introduction GPRS.
• Introduction UMTS.
• Introduction to Base Transceiver station (BTS).
• Main principle feature and characteristics of a BTS.
• BTS Cabinets structure, description and types.
• BTS hardware architecture and connection (SUM, TRX, ANY, ANX, BTSCA, Fan Unit, PSU, DC, Sub racks etc).
• BTS Ranges
• BTS configuration, Test and commissioning.
• Environmental compatibility (EMC)
• BTS fault finding and troubleshooting
• Site visit.
Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Field Support Engineer Telecoms is a hybrid course and is one of the most sought after profession in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as self an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962