SPECIAL 50TH INDEPENDENCE OFFER IN CRS, CALABAR
If you are in Calabar and environ: we bring to you a first class training in GSM, CDMA, etc. This will enable you meet up with job requirements with GSM Operators/Vendors company like Huawei, Nokia, MTN, Etisalat, GlobalTouch W.A, starcomms, zoom, Zain, Glo, Ericsson and so on. Truly speaking there is no way you can meet up with their requirement without doing this couses which are quite practical because of the real-time nature of technology employed: Life router, signal controls, network architecture analysis and so on. Almost at no price considering the amount it takes to run such courses. It is our way of celebrating the 50th independence of Naija. Seize this opportunity as we intend to start once we get the 1st 15 candidates. To indicate interest and show the topic area you want to be trained on, send a mail to[email protected] or call:08036822343 and we'l give you the venue detail, commencement time and other info you will require. Open to telecom engineers, graduates, non graduates and all interested persons with atleast basic computer training and SSCE. Offer closes by 12th Oct 2010. Also view a brief copy of our profile if you wish. See analysis below:

CORNERSTONE TECHNOLOGY SOLUTIONS LTD
IT/TELECOM TRAINING & RECRUITMENT CONSULTANTS
Tel:- +234 803 6822343 [email protected]

COURSES COVERED:

MODULE 1:- GSM System Overview N7,500
Introduction to Mobile Communications, GSM System Overview (BSS, SS & OMC), Cell Planning & Frequency Re-Use (4/12, 3/9, 7/21), Operation Support System (OSS), Channel Concepts (BCH, CCCH, DCCH & TCH), Subscriber services, Digital Radio Transmission, Traffic cases, Billing / Tariff Structure.

MODULE 2:- CDMA Technology N5,000
CDMA Network Elements (PSTN, MSC, HLR, VLR, BSS), CDMA Channels (Physical & Logical Channels), CDMA Codes (Walsh Code, Long Code, Short Code), Mobile Station Handoffs (Soft & Softer Handoffs), Voice Signal Conversion & Flow, Basic Call Processing.

MODULE 3: - BASE STATION SUBSYSTEM (BSS) ENGINEERING N20,000
Typical BTS site, BTS configurations / Installation, DIP Switch setting, Detection of Alarms, Troubleshooting & Commissioning the BTS
Typical BSC site, BSC Configuration / Installation, Configuring the Abis & Ater interfaces , Loging into the BSC using vendor specific software, BSC Maintenance.

MODULE 4: - RADIO FREQUENCY (RF) PLANNING & OPTIMIZATION N10,000
Dimensioning the BSS, Estimation of Cell Radius, Estimation of number & capacities of BTSs / BSCs for any specified geographical area, Selecting the antennas / Sites, Assigning frequencies using 1X1, 3X3, or 4x3 frequency re-use partterns, Planning of Neighbour cells / Location Areas, Single Site Verification, RF / KPI Optimization, Network Acceptance.

MODULE 5:- TRANSMISSION ENGINEERING N20, 000
Different Transmission Media, Different Multiplexing Techniques, Distribution of E1 signals from MSC to BTSs via the BSC, Planning / Implementation of Microwave Radio Links (PDH/SDH) using Path loss software, VSAT Installation / Maintenance & Commissioning, Introduction to Fibre Optics, Splicing, Connectorization & Implementation.

MODULE 6:- UMTS / WCDMA SYSTEM ENGINEERING N10,000
Different types of 3G networks & and their Evolution, Upgrading GSM (2G) network to UMTS (3G), UMTS network components (UE, UTRAN & CN), UMTS network structures (R99, R4, R5), UMTS services (Camel Phase 3, LCS, MMS), UTRAN network components (Node B & RNC), Single / Distributed NodeB Installation, Commisioning & Integration.

N/B:- Cost for all modules is N50,000.00. Payment can be made in instalments, but must be completed before end of training. Also negotiable based on the response.

Remember no other outfit does this at this amount, you can do your findings before contacting us! Thanks.