Pipesim,prosper,mbal,gap-may-aug 2016

ELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil and gas industry. We offer training to, consultant, engineers, managers, senior and junior staff in the oil and gas industry as well as fresh graduates and focused undergraduates. Our interest is for those pursuing excellence and improvement in their career. Our work force is made up of young Nigerian engineering graduates who have acquired software skills through the PTDF scheme. Our goal is to transfer knowledge at its best. The software’s we offer are used mostly by SHELL, MOBIL, SCHLUMBERGER, TOTAL, ELF, AGIP,chevron, AND other major oil companies in Nigeria.we have experience in training and field operations.we have evolved over the years to be a brand name in oil and gas training and other computer based courses.enrol today.

TRAINING BROCHURE

PROSPER (PRODUCTION SYSTEM PERFORMANCE) 12 DAYS

MBAL(MATERIAL BALANCE) 8 DAYS

GAP- 10 DAYS

. PROSPER

PROSPER is a well performance, design and optimisation program for modelling most types of well configurations found in the worldwide oil and gas industry today. PROSPER can assist the production or reservoir engineer to predict tubing and pipeline hydraulics and temperatures with accuracy and speed. PROSPER's sensitivity calculation features enable existing well designs to be optimised and the effects of future changes in system parameters to be assessed.

PROSPER is designed to allow building of reliable and consistent well models, with the ability to address each aspect of well bore modelling viz; PVT (fluid characterisation), VLP correlations (for calculation of flowline and tubing pressure loss) and IPR (reservoir inflow). By modelling each component of the producing well system, the User can verify each model subsystem by performance matching. Once a well system model has been tuned to real field data, PROSPER can be confidently used to model the well in different scenarios and to make forward predictions of reservoir pressure based on surface production data.

With PROSPER detailed flow assurance can be studied at well and surface pipeline level. PROSPER provides unique matching features which tune PVT, multiphase flow correlations and IPR to match measured field data, allowing a consistent model to be built prior to use in prediction (sensitivities or artificial lift design).

Production System Analysis

· Inflow performance models (IPR)s

· Horizontal well with pressure drop in well

· Multi-layer with pressure drop in well

· Hydraulic fracture

· Time dependant IPR

· Multi-laterals

· Dual porosity

· Outflow

· Pipe stability calculations

· Proprietary well pressure drops model -

· PVT - Oil, Gas, Condensate - Black Oil or Fully Compositional

· Tubing and pipeline quality check

· Sensitivity analysis

[IMG]file:///C:\Users\ELDEMU~1\AppData\Local\Temp\msohtmlclip1\ 01\clip_image002.jpg[/IMG]

Well Types

· Gas, oil, water, condensate, steam, injection wells

· Naturally flowing

· Artificially lifted

· Multi-layer

· Multi-lateral

· Angled and horizontal

Artificial Lift System Analysis and Design

· Electric Submersible Pump - ESP

· Gas Lift

· Hydraulic Pumps - HSP

· Progressive Cavity Pumps - PCP

· Jet Pumps

· Beam Pumps - Rod

· Design new artificial lift systems

· Verify the efficiency of existing system.

.GAP

GAP is a multiphase oil and gas optimiser tool that models the surface gathering network of field production systems. When linked with the well models of PROSPER and reservoir models of MBAL

a full field production optimisation and forecast can be achieved. GAP can model production systems containing oil, gas and condensate, in addition to gas or water injection systems.

GAP's powerful non-linear optimisation engine allocates gas for gas lifted wells or sets wellhead chokes for naturally flowing wells to maximise revenue or oil/gas production while honouring constraints at any level in the system.

Multi-well optimisation for artificially lifted and naturally flowing production networks:

Surface gathering system models with constraints

Looped networks

Gas and condensate gathering systems

Oil and water gathering systems

Injections networks

Compressor modelling

Pump modeling

[IMG]file:///C:\Users\ELDEMU~1\AppData\Local\Temp\msohtmlclip1\ 01\clip_image004.jpg[/IMG]

Optimisation of gathering system against constraints:

Fast and robust Global Optimisation algorithm using non-linear programming (NLP) which has been recognised in the industry as best in class.

Wellhead chokes can be set, compressors and pumps optimised, and gas for gas lifted wells allocated to maximise production

Multiple Flowlines

Multiple Separators

Unlimited number of nodes - wells, reservoir, etc.

Field optimisation studies with mixed systems (ESP, GL, Naturally Flowing, PCP, Jet and Rod Pumps)

Optimise production forecasting

Pipeline Flow Assurance Studies

Reservoir Management

Models injection system performance, using MBAL or other numerical reservoir models

Advises on wellhead chokes settings to meet reservoir management targets

Fully Compositional from the Reservoir to the Process side

Easy to use graphical interface for drawing system network (using icons for separators, compressors, pipelines, manifolds and wells, inline chokes and reservoir tanks

ELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil and gas industry. We offer training to, consultant, engineers, managers, senior and junior staff in the oil and gas industry as well as fresh graduates and focused undergraduates. Our interest is for those pursuing excellence and improvement in their career. Our work force is made up of young Nigerian engineering graduates who have acquired software skills through the PTDF scheme. Our goal is to transfer knowledge at its best. The software’s we offer are used mostly by SHELL, MOBIL, SCHLUMBERGER, TOTAL, ELF, AGIP,chevron, AND other major oil companies in Nigeria.we have experience in training and field operations.we have evolved over the years to be a brand name in oil and gas training and other computer based courses.enrol today.

TRAINING BROCHURE

PROSPER (PRODUCTION SYSTEM PERFORMANCE) 12 DAYS

MBAL(MATERIAL BALANCE) 8 DAYS

GAP- 10 DAYS

. PROSPER

PROSPER is a well performance, design and optimisation program for modelling most types of well configurations found in the worldwide oil and gas industry today. PROSPER can assist the production or reservoir engineer to predict tubing and pipeline hydraulics and temperatures with accuracy and speed. PROSPER's sensitivity calculation features enable existing well designs to be optimised and the effects of future changes in system parameters to be assessed.

PROSPER is designed to allow building of reliable and consistent well models, with the ability to address each aspect of well bore modelling viz; PVT (fluid characterisation), VLP correlations (for calculation of flowline and tubing pressure loss) and IPR (reservoir inflow). By modelling each component of the producing well system, the User can verify each model subsystem by performance matching. Once a well system model has been tuned to real field data, PROSPER can be confidently used to model the well in different scenarios and to make forward predictions of reservoir pressure based on surface production data.

With PROSPER detailed flow assurance can be studied at well and surface pipeline level. PROSPER provides unique matching features which tune PVT, multiphase flow correlations and IPR to match measured field data, allowing a consistent model to be built prior to use in prediction (sensitivities or artificial lift design).

Production System Analysis

· Inflow performance models (IPR)s

· Horizontal well with pressure drop in well

· Multi-layer with pressure drop in well

· Hydraulic fracture

· Time dependant IPR

· Multi-laterals

· Dual porosity

· Outflow

· Pipe stability calculations

· Proprietary well pressure drops model -

· PVT - Oil, Gas, Condensate - Black Oil or Fully Compositional

· Tubing and pipeline quality check

· Sensitivity analysis

[IMG]file:///C:\Users\ELDEMU~1\AppData\Local\Temp\msohtmlclip1\ 01\clip_image002.jpg[/IMG]

Well Types

· Gas, oil, water, condensate, steam, injection wells

· Naturally flowing

· Artificially lifted

· Multi-layer

· Multi-lateral

· Angled and horizontal

Artificial Lift System Analysis and Design

· Electric Submersible Pump - ESP

· Gas Lift

· Hydraulic Pumps - HSP

· Progressive Cavity Pumps - PCP

· Jet Pumps

· Beam Pumps - Rod

· Design new artificial lift systems

· Verify the efficiency of existing system.

.GAP

GAP is a multiphase oil and gas optimiser tool that models the surface gathering network of field production systems. When linked with the well models of PROSPER and reservoir models of MBAL

a full field production optimisation and forecast can be achieved. GAP can model production systems containing oil, gas and condensate, in addition to gas or water injection systems.

GAP's powerful non-linear optimisation engine allocates gas for gas lifted wells or sets wellhead chokes for naturally flowing wells to maximise revenue or oil/gas production while honouring constraints at any level in the system.

Multi-well optimisation for artificially lifted and naturally flowing production networks:

Surface gathering system models with constraints

Looped networks

Gas and condensate gathering systems

Oil and water gathering systems

Injections networks

Compressor modelling

Pump modeling

[IMG]file:///C:\Users\ELDEMU~1\AppData\Local\Temp\msohtmlclip1\ 01\clip_image004.jpg[/IMG]

Optimisation of gathering system against constraints:

Fast and robust Global Optimisation algorithm using non-linear programming (NLP) which has been recognised in the industry as best in class.

Wellhead chokes can be set, compressors and pumps optimised, and gas for gas lifted wells allocated to maximise production

Multiple Flowlines

Multiple Separators

Unlimited number of nodes - wells, reservoir, etc.

Field optimisation studies with mixed systems (ESP, GL, Naturally Flowing, PCP, Jet and Rod Pumps)

Optimise production forecasting

Pipeline Flow Assurance Studies

Reservoir Management

Models injection system performance, using MBAL or other numerical reservoir models

Advises on wellhead chokes settings to meet reservoir management targets

Fully Compositional from the Reservoir to the Process side

Easy to use graphical interface for drawing system network (using icons for separators, compressors, pipelines, manifolds and wells, inline chokes and reservoir tanks

?

Contact& TRAINING BATCH START DATES;

Each of the programs below fit into this schedule call us to enroll

MAY 2016-AUGUST 2016

MAY 2016

MONDAY -2ND MAY

----------- 16^{TH MAY

------------30TH MAY2016

JUNE 2016

-----------7TH JUNE 2016

-----------14TH JUNE

MONDAY -27TH JUNE 2016

JULY 2016

MONDAY-4TH JULY 2016

MONDAY-11TH JULY 2016

MONDAY -25TH JULY 2016

AUGUST 2016

MONDAY -1TH AUGUST 2016

MONDAY 8TH AUGUST 2016

MONDAY-29TH AUGUST 2016.

Contact;

Telephone -,08038812638,07051852201,08064673745

Email;[email protected],[email protected]

Office address-Eldemuz engineering centre,

1st floor ,60 Aba road ,by craft centre busstop ,portharcourt,

Rivers state, Nigeria}