Oil and gas training in portharcourt.april to august 2013 schedule

1. OIL AND GAS TRAINING/safety institute Training brochure IN PORT HARCOURT 2013-download
ELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil and gas industry. We offer training to, consultant, engineers, managers, senior and junior staff in the oil and gas industry as well as fresh graduates and focused undergraduates. Our interest is for those pursuing excellence and improvement in their career. Our work force is made up of young Nigerian engineering graduates who have acquired software skills through the PTDF scheme. Our goal is to transfer knowledge at its best. The software’s we offer are used mostly by SHELL, MOBIL, SCHLUMBERGER, TOTAL, ELF, AGIP AND other major oil companies in Nigeria.
Courses available
1. OIL & GAS PROCESS MODELING WITH ASPEN HYSYS(2weeks or 45hrs)
2.HYSYS DYNAMIC SIMULATION(1week or 10hrs)
3 PIPESIM-PIPELINE SIMULATION ,SURFACE AND SUB-SURFACE PIPING sim(2 WEEKS-40HRS)
4. Basic PIPING DESIGN,stress analysis AND PLANT LAYOUT TRAINING course(2weeks or 150hrs)
5. PLANT design AND STRESS ANALYSIS (PDMS & CAESAR (4weeks or 70hrs)
6. CAESARII-stress analysis(10hrs or 1week)
7. FULL PACKAGE AUTOCAD (2D, 3D&ISOMETRICS)(2weeks or 50hrs)
8. PETREL(SEISMIC TO SIMULATION SOFTWARE,GEOSTATIC MODELLING)(2 weeks or 50hrs)
9. ECLIPSE DYNAMIC RESERVOIR SIMULATION (PREDICTION & HISTORY MATCHING)(2weeks and 40hrs)
10. PROSPER(WELL SYSTEM ANALYSIS,DESIGN &PERFORMANCE)-(2weeks or 60hrs)
11. MBAL (material balance, history matching and prediction for single well)(1week or 30hrs)
12.PROJECT MANAGEMENT TRAINING WITH PRIMAVERA (P6) ms-project. (2weeks or 40hrs).
13. ETAP-electrical/power systems(2weeks or 60hrs)

DETAILED TRAINING COURSE OUTLINE
1.OIL & GAS PROCESS MODELING WITH ASPEN HYSYS(2weeks or 45hrs)
scope
•Introduction to HYSYS
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Oil Characterization
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG
Process Plant Costing
• Reporting in Aspen HYSYS
2.HYSYS DYNAMIC SIMULATION(1week or 10hrs)
The dynamic simulation specifically handles EQUIPMENT sizing and process control
1. REVISION OF STEADY STATE
2. BASIC CONTROL THEORY
3. PRESSURE-FLOW RELATIONSHIP
4. TRANSITIONING FROM STEADY STATE TO DYNAMICS-MODYFYING THE STEADY STATE
5. SIZING UNIT OPERATIONS (DE-PROPANIZER COLUMN, SEPERATORS etc)
6. USING THE DYNAMICS ASSISTANT AND ACTIVATING THE DYNAMIC MODE
7. INSTALLING THE CONTROLLERS (PID)
8. SETTING UP STRIP CHARTS
9. RUNNING AND MONITORING DYNAMIC SIMULATION.
10. ADVANCED DYNAMICS

3. PIPESIM-PIPELINE SIMULATION ,SURFACE AND SUB-SURFACE PIPING sim
COURSEOUTLINE
1.INTRODUCTION
2.SINGLE PHASE FLUID MODELING-WATER,GAS OIL
3.WELL PERFORMANCE MODELING.
4.ARTIFICIAL LIFT DESIGNS.
5.SINGLE BRANCH PIPELINE AND FACILITIES
6.NETWORK MODELLING-

4.Basic PIPING DESIGN,stress analysis AND PLANT LAYOUT TRAINING course(8weeks or 150hrs)
(3-softwares are to be used here-autocad,pdms,caesarII)
1.Plant layout fundamentals and work flow procedures
2• Terminology and symbols used in plant layout
3• Plot plans, elevations and 3-D models
4• Fundamental principles of chemical process technology
5• Process flow diagrams (PFDs)
6• Equipment used in process plants
7• Instrument symbols and abbreviations
8• Piping and instrumentation diagrams (P&IDs)
9• Piping design and engineering principles
10• Terminology, symbols and abbreviations used in piping design
11• Piping materials
12• Piping specifications and piping codes
13• Components of piping systems - fittings, flanges and valves
14• Piping isometrics and bill of materials



5.PLANT design AND STRESS ANALYSIS (PDMS & CAESARII)
PDMS SCOPEs.(4weeks or 70hrs )
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors)for civil
And structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
The training will be based on ASME B31.3 &B31.4 CODE.
At the end of the training, a PILOT project on modeling of an liquefied petroleum gas plant (COOKING GAS PLANT) will be carried out by the trainee.

6.CAESARII SCOPE(20hrs or 2week)
1. Basic functions of a pipe stress engineer, with emphasis on the relationship between the discipline and piping design.
2. Sources and solutions to piping stress related problems.
3. Pipe support standards.
4. Introduction to stress analysis
5. Setting pipe models for stress analysis
6.analysis on pumps.
7. Analysis

7.FULL PACKAGE AUTOCAD (2D, 3D&ISOMETRICS)(3weeks or 50hrs)
COURSE CONTENT-2D DRAFTING & 3D MODELLING
a. AutoCAD general
b. AutoCAD mechanical
c. AutoCAD PID, piping and instrumentation design.
D. AutoCAD structural /architectural.
AUTOCAD 2D DRAFTING
B. AUTOCAD MECHANICAL
1. DESIGN OF BASIC MECHANICAL COMPONENTS.(BOLTS,NUTS,FLANGES,E.T.C
2. INTERPRETATION OF METRIC AND IMPERIAL STANDARDS.AND DESIGN IMPLICATIONS.
3. Machine drawing
C. AUTOCAD PIPING.
1. PIPE DRAFTING AND DESIGN (PIPE ISOMETRICS, DOUBLE AND SINGLE LINE DRAFTING)
2.PIPING AND INSTRUMENTATION DIAGRAMS (P&ID),
4.PROCESS FLOW DIAGRAMS/SHEETS (PFD/PFS)
D.AUTOCAD CIVIL/STRUCTURAL/
1. House plan and elevations
2. BEAMS AND COLUMN DESIGN
3. SLAB DESIGN
AUTOCAD 3D MODELLING,
1. Introduction to 3d fundamentals-BASIC TOOLS (MODELING TOOL,SOLID EDITING,VIEWS,VISUAL STYLES ,3D MODIFY)
2. Modeling of structures (houses, PLATFORMS etc.)
3. Modeling of mechanical parts and components i.e. mechanical coupling
4. Modeling of piping components (elbows, tees, flange, reducer, valves, etc.) FOR 3D PIPING
5. DESIGN OF EQUIPMENTS (, pumps, pressure vessels, heat exchangers, e.tc)
6. Project and assessment

8.PETREL(SEISMIC TO SIMULATION SOFTWARE,GEOSTATIC MODELLING)(3 weeks or 50hrs)
1 Theoretical principle of reservoir estimation. (VOLUME CALCUATION,MATERIAL BALANCE)
2 introduction to petrel seismic to simulation software.
3 Importation of data and QC.
4.seimic interpretation
A. Surface interpretation
B. Fault interpretation
5. Structural modeling(faults ,vertical layering)
6. Grid Property modeling (porosity, permeability, N/G, SW facies)
7. Definition of fluid contacts.
8. Reservoir mapping. PLOTTING
9. Pay zone insitu volume calculation.
10.Setting up a simulation case in petrel and exporting for eclipse 100 black oil isothermal
Simulator.

9.ECLIPSE(2weeks or 40hrs)
ECLIPSE DYNAMIC RESERVOIR SIMULATION (PREDICTION & HISTORY MATCHING)
A .An Introduction to dynamic ISOTHERMAL BLACK OIL simulation (ECLIPSE 100)
B. The DIFFUSSIVITY equation & MB. Equations (EOS), VLPs & IPRs
C.Introduction to Eclipse and Eclipse family of softwares(eclipse 100,300,PVTi fluid
characterization, office etc.)
D, understanding and coding eclipse using notepad. (ascii method ,include files .
1. The RUNSPEC,
2. GRID section.(grid) permx, permy, permz, porosity………
3.Properties section,(Live oil PVTO,DEADOIL PVCDO,FLASH PARAMETERIZATION)
4. Solution -initialization section(EQUILIBRATION,AQUIFERS)
5. Schedule section (Prediction simulation/HISTORY MATCHING).
6.Summary section (OUTPUT OF SIMULATION RESULTS,FIELD,WELL AND BLOCK PRODUCTION E.T.C
7, Running a case generated in petrel in eclipse (gullfaks oil field, Egypt oil field )
8. Introduction to eclipse office
9. Building & running a prediction & HISTORY MATCH model of CASE STUDIES OF a NUMERICAL aquifer reservoir in eclipse
10. Building and running artificial gas lift operation in eclipse.
11. Running API TRACKING simulation in eclipse.
12. Brine injection (artificial lift)
13. Technical discussion and interpretation of graphs (PVT,SATURATION,PRODUCTION)
14. PVT ANALYSIS USING PVTI
15. SIMOPT IN ECLIPSE

10.PROSPER(WELL SYSTEM ANALYSIS,DESIGN &PERFORMANCE)-(2weeks or 60hrs)
1. Introduction to prosper.
2.getting started, modelling a natural flowing well.
3. gas lift design and operation for a single well.
4.well and flow line modeling.
5.ESP –(electric submersible pump) lifted well and pump sizing for artificial lifting
6.modeling a gravel packed gas well.
7. modeling a horizontal well friction dp
8. model of gas injector with down hole chokes in a multilateral well model
11.MBAL (material balance, history matching and prediction for single well)(1week or 30hrs)
1. Introduction to mbal
2. Model of aquifer driven oil reservoir.
3. History matching and prediction with set flow rates for single wells and control by (water cut & GOR
4.HISTORY MATCHING AND PREDICTION ,TANK BY TANK BASIS.

12.PROJECT MANAGEMENT TRAINING WITH PRIMAVERA (P6) &ms-project IN PORTHARCOURT(2weeks or 40hrs).
Course Title: PRIMAVERA (P6)/ms-project Project management basic course
Project Planners, Schedulers, Project Managers, Project Coordinators, Resource/cost Managers, Project Engineers, Project Team Members, Project Officers, and all those involved in projects.
Course Benefits:
The Course will help you to;
1. Control your project's schedule, budget and deliverables thereby assuring the success of your projects and the future of your business.
2. Prioritize and deliver your project on-schedule and on-budget.
3. Track budget, expenses, cost variances and project changes.
4. To analyze comparative trends and cause/effect among multiple projects enabling you to maximize efficiency and profits, while minimizing project cost, risks, and safety issues.
5. Manage projects to on-time and on-budget completion.
Primavera P6 as a tool remains the best software for planning and scheduling of projects.
The modules that we handle will effectively treat the above topics.
Training duration: 3 Days
Training is on weekends and private schedule all through the year
Daily duration- 9.00 am-4pm

13.ETAP-electrical/power systems(2weeks or 60hrs)
ETAP IS A SOFTWARE USED FOR ELECTRICAL SYSTEMS DESIGN&ANALYSIS,WITH ETAP THE ELECTRICAL ENGINEER ACQUIRE INDUSTRIAL SKILLS FOR DESIGN ,MODIFICATION,UPGRADE,AUTOMATION AND CONTROL OF ELECTRICAL SYSTEMS AS WELL AS BEING ABLE TO SUPERVISE ELECTRICAL SYTEM FACILITIES PERFORMANCE.ETAP SUMMARISE THE ACTIVITIES OF THE PROFFESIONAL ELECTRICAL ENGINEER.THE SOFTWARE HAS WIDE APPLICATION IN THE OIL AND GAS INDUSTRY AND OTHER INDUSTRIAL PLANT APPLICATIONS ESPECIALLY IN PROJECTS INVOLVED IN GETTING ELECTRICAL SYTEM DELIVERABLES.WORLWIDE ETAP IS USED BY ,CHEVRON,MOBIL,SHELL,CONOCO,HALLIBURTO,TOTAL AND OTHER MAJOR INDUSTRIAL PLAYERS.INCLUDING UTILITY AND POWER COMPANIES.
IN A BID TO STRENGHTEN OUR INDIGENEOUS CAPACITY THROUGH THE NIGERIAN CONTENT POLICY,ELDEMUZ GLOBAL CONCEPTS A LEADING OIL AND GAS TRAINING FIRM IN PORTHARCOURT IN CONJUNCTION WITH A TEAM OF NIGERIAN ELECTRICAL ENGINEERS AND ETAP PROFFESIONAL ORGANISE THIS HANDS ON TRAINING EXERCISE.DETAILED BELOW.
ETAP COURSE OUTLINE
1 ETAP overview.
2 One Line Diagram.
3 Load flow analysis.
4 Short circuit analysis.
5 Unbalanced load flow analysis.
6 Device-coordination selectivity.
7 Cable system review.
8 Motor acceleration review analysis.
9 Load flow modeling.
10 Device-coordination.
11 Transformer sizing.
12 Ground grid system.
13 Literary system.

Prerequisite:All categories of engineering AND NON-ENGINEERING graduates and students
Date: batch dates -29TH APRIL,1ST MAY,15TH MAY,30TH MAY,
3RD JUNE,17TH JUNE,24THJUNE,1ST JULY,22ND JULY,
1STAUGUST,19TH AUGUST,26TH AUGUST 2013
Venue-Eldemuz Engineering Training centre.
First floor,60 Aba road by craft centre busstop
Portharcourt
info @eldemuz.com,[email protected]
07051852201,08038812638,08187585202,

Pls call 08038812638 for details

Pls call 08038812638

pls call 08038812638 for details

pls call 08038812638 for details.

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638

Pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038811638

Pls call 08038812638

pls call 08038812638 for details

Pls call 08038812638 for details

Pls call 08038812638

Pls call 08038812638

Pls call 08038812638

Pls call 08038812638

Pls call 08038812638

Pls call 08038812638

Call 08038812638

Pls call 08038812638

Pls call 08038812638

Pls call 08028812638

Pls call 08038812638

Pls call 08038812638 for details

Pls call 08038812638

Pls call 08038812638

pls call 08038812638 for details

Pls call 08038812638 for details

pls call 08038812638 for details

pls call 08038812638 for details

pls call 08038812638 for details

pls call 08038812638 for details

Pls call 08038812638