Oil & gas plant design engineering& project management training in ph 2015

ELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil and gas industry. We offer training to, consultant, engineers, managers, senior and junior staff in the oil and gas industry as well as fresh graduates and focused undergraduates. Our interest is for those pursuing excellence and improvement in their career. Our work force is made up of young Nigerian engineering graduates who have acquired software skills through the PTDF scheme. Our goal is to transfer knowledge at its best. The software’s we offer are used mostly by SHELL, MOBIL, SCHLUMBERGER, TOTAL, ELF, AGIP,chevron, AND other major oil companies in Nigeria.we have experience in training and field operations.
DETAILED TRAINING COURSE OUTLINE for
Plant Design Engineering Training in portharcourt-().

1.OIL & GAS PROCESS MODELING WITH ASPEN HYSYS(4weeks )
scope
•Introduction to HYSYS
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Oil Characterization
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG
Process Plant Costing
• Reporting in Aspen HYSYS

2.HYSYS DYNAMIC SIMULATION(2 weeks)
The dynamic simulation specifically handles EQUIPMENT sizing and process control
1. REVISION OF STEADY STATE
2. BASIC CONTROL THEORY
3. PRESSURE-FLOW RELATIONSHIP
4. TRANSITIONING FROM STEADY STATE TO DYNAMICS-MODYFYING THE STEADY STATE
5. SIZING UNIT OPERATIONS (DE-PROPANIZER COLUMN, SEPERATORS etc)
6. USING THE DYNAMICS ASSISTANT AND ACTIVATING THE DYNAMIC MODE
7. INSTALLING THE CONTROLLERS (PID)
8. SETTING UP STRIP CHARTS
9. RUNNING AND MONITORING DYNAMIC SIMULATION.
10. ADVANCED DYNAMICS
BASIC PLANT LAYOUT,PFD,PID ,ISOMETRIC ENGINEERING
1.Plant layout fundamentals and work flow procedures
2• Terminology and symbols used in plant layout
3• Plot plans, elevations and 3-D models
4• Fundamental principles of chemical process technology
5• Process flow diagrams (PFDs)
6• Equipment used in process plants
7• Instrument symbols and abbreviations
8• Piping and instrumentation diagrams (P&IDs)
9• Piping design and engineering principles
10• Terminology, symbols and abbreviations used in piping design
11• Piping materials
12• Piping specifications and piping codes
13• Components of piping systems - fittings, flanges and valves
14• Piping isometrics and bill of materials

5.PLANT design MANAGEMENT SYSTEM(PDMS)-3D PLANT MODELING
PDMS SCOPEs.(4weeks-50 HRS)
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors)for civil
And structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
The training will be based on ASME B31.3 &B31.4 CODE.
At the end of the training, a PILOT project on modeling of an liquefied petroleum gas plant (COOKING GAS PLANT) will be carried out by the trainee.

.CAESARII SCOPE(2WEEKS)-PIPE STRESS ANALYSIS.
1. Basic functions of a pipe stress engineer, with emphasis on the relationship between the discipline and piping design.
2. Sources and solutions to piping stress related problems.
3. Pipe support standards.
4. Introduction to stress analysis
5. Setting pipe models for stress analysis
6.analysis Of rotating equipment
7. Undergroumd/buried pipeline stress analysis
8.Subsea pipeline design and stress analysis.
9.surface piping stress analysis.

FULL PACKAGE AUTOCAD (2D, 3D&ISOMETRICS)(4weeks)
COURSE CONTENT-2D DRAFTING & 3D MODELLING
a. AutoCAD general
b. AutoCAD mechanical
c. AutoCAD PID, piping and instrumentation design.
D. AutoCAD structural /architectural.
AUTOCAD 2D DRAFTING
B. AUTOCAD MECHANICAL
1. DESIGN OF BASIC MECHANICAL COMPONENTS.(BOLTS,NUTS,FLANGES,E.T.C
2. INTERPRETATION OF METRIC AND IMPERIAL STANDARDS.AND DESIGN IMPLICATIONS.
3. Machine drawing
C. AUTOCAD PIPING.
1. PIPE DRAFTING AND DESIGN (PIPE ISOMETRICS, DOUBLE AND SINGLE LINE DRAFTING)
2.PIPING AND INSTRUMENTATION DIAGRAMS (P&ID),
4.PROCESS FLOW DIAGRAMS/SHEETS (PFD/PFS)
D.AUTOCAD CIVIL/STRUCTURAL/
1. House plan and elevations
2. BEAMS AND COLUMN DESIGN
3. SLAB DESIGN
AUTOCAD 3D MODELLING,
1. Introduction to 3d fundamentals-BASIC TOOLS (MODELING TOOL,SOLID EDITING,VIEWS,VISUAL STYLES ,3D MODIFY)
2. Modeling of structures (houses, PLATFORMS etc.)
3. Modeling of mechanical parts and components i.e. mechanical coupling
4. Modeling of piping components (elbows, tees, flange, reducer, valves, etc.) FOR 3D PIPING
5. DESIGN OF EQUIPMENTS (, pumps, pressure vessels, heat exchangers, e.tc)
6. Project and assessment

PROJECT MANAGEMENT TRAINING WITH PRIMAVERA (P6) &Ms-project in PORTHARCOURT(1week )
Course Title: PRIMAVERA (P6)/Ms-Project) Project management course
Project Planners, Schedulers, Project Managers, Project Coordinators, Resource/cost Managers, Project Engineers, Project Team Members, Project Officers, and all those involved in projects.

Course Benefits:
The Course will help you to;
1. Control your project's schedule, budget and deliverables thereby assuring the success of your projects and the future of your business.
2. Prioritize and deliver your project on-schedule and on-budget.
3. Track budget, expenses, cost variances and project changes.
4. To analyze comparative trends and cause/effect among multiple projects enabling you to maximize efficiency and profits, while minimizing project cost, risks, and safety issues.
5. Manage projects to on-time and on-budget completion.
Primavera P6 as a tool remains the best software for planning and scheduling of projects.
Scope:
-intoroduction to project management
-Creating a project,wbs,activities and relationship
-Scheduling
-Costing
-Project execution,statusing and control
-Reporting,
-Import&export,S-curve.
Case studies-construction project,software design,organizational operation. And others based on the candidates discipline.

Training duration: 5Days
Training is on weekends and weekdays private schedule all through the year
Daily duration-5hrs each day.


Prerequisite:All categories of oil and gas workers(Engineering and Non-engineering)/interested non-oil and gas workers. and applicants
Date: batch dates -5TH JAN,12TH JAN,25TH JAN,2ND FEB ,16TH FEB,23RD FEB,2ND MARCH,17TH MARCH,24TH MARCH,2015.
Venue-Eldemuz Engineering Training centre.
First floor,60 Aba road by craft centre busstop
Portharcourt
info @eldemuz.com,[email protected]
08038812638,08064673745.

pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638

Pls call 08038812638

pls call 08038812638

pls call 08038812638

pls call 08038812638