Oil,gas,engineering,project management,data management training -ph -may-aug.2016

ELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil aELDEMUZ ENGINEERING CONSULTING IS A registered LOCAL CONTENT PARTNER with the federal government of Nigeria IN CAPACITY DEVELOPMENT for the oil and gas industry. We offer training to, consultant, engineers, managers, senior and junior staff in the oil and gas industry as well as fresh graduates and focused undergraduates. Our interest is for those pursuing excellence and improvement in their career. Our work force is made up of young Nigerian engineering graduates who have acquired software skills through the PTDF scheme. Our goal is to transfer knowledge at its best. The software’s we offer are used mostly by SHELL, MOBIL, SCHLUMBERGER, TOTAL, ELF, AGIP,chevron, AND other major oil companies in Nigeria.we have experience in training and field operations.we have evolved over the years to be a brand name in oil and gas training and other computer based courses.enrol today.

TRAINING BROCHURE

TABLE OF CONTENT.

BASIC,INTERMEDIATE & ADVANCED EXCEL- 5 DAYS

PRIMAVERA(P6)-project management - 3DAYS

MS-PROJECT- project management - 3DAYS

CAESAR II-PIPE AND ROTATING EQUIPMENT PERFORMANCE STRESS ANALYSIS- 5DAYS

AUTOCAD P&ID-PIPIPING AND INSTUMENTATION DESIGN AND INTERPRETATION-

ETAP.- POWER SYSTEMS DESIGN- 5 DAYS

AUTODESK INVENTOR- ADVANCED MECHANICAL MODELING- 15 DAYS

?

8. BA SIC AUTOCAD 2D,3D, AND ISOMETRICS,

9. MATLAB-PROGRAMING AND SIMULATION- 4 DAYS

10.PDMS-PLANT DESIGN MANAGEMENT SYSTEM

(PLANT DESIGN,OPERATION & MAINTENANCE- 10 DAYS

11 HYSYS- PLANT PROCESS SIMULATION AND DYNAMIC CONTROL.- 12DAYS

12.SAP-PLANT MAINTENANCE, PROCUREMENT AND INVENTORY MANAGEMENT.-

13.OSHA ACADEMY SAFETY ATP.-SAFETY- 3 DAYS.

14.Orion

15.AUTOCAD CIVIL 3D

16.Staadpro(Structural design) 8 days each

17.PROSPER-OIL WELL production system performance- 10 days

PETREL-SEISMIC INTERPRETATION AND RESERVOIR MODELING- 12DAYS

18.ECLIPSE-DYNAMIC RESERVOIR SIMULATION 8 DAYS

19.GAP-GENERAL APPLICATION PACKAGE 6DAYS

19.SAGE 50 6 DAYS.

20.PIPESIM 10 DAYS

1. Comprehensive Microsoft Excel 2013

Class Description (comprehensive)

Class Overview

On the first day of this comprehensive Microsoft Excel 2013 training course, students will learn to use Excel 2013 to create, modify, and format Excel worksheets, perform calculations, and print Excel workbooks. The second day of class will focus on using advanced formulas, working with lists, working with illustrations and charts, and using advanced formatting techniques. And on the third, fourth and final day of class, students will learn to work with pivot tables, audit worksheets, work with data tools, protect documents for collaboration with others, and work with macros.

This Comprehensive Microsoft Excel 2013 Training class is a combination of the following courses:

Introduction to Microsoft Excel 2013 Training

Intermediate Microsoft Excel 2013 Training

Advanced Microsoft Excel 2013 Training

Class Goals

Create basic worksheets using Microsoft Excel 2013.

Perform calculations in an Excel worksheet.

Modify an Excel worksheet.

Modify the appearance of data within a worksheet.

Manage Excel workbooks.

Print the content of an Excel worksheet.

Learn to use formulas and functions.

Create and modify charts.

Convert, sort, filter, and manage lists.

Insert and modify illustrations in a worksheet.

Learn to work with tables.

Learn to use conditional formatting and styles.

Create pivot tables and charts.

Learn to trace precedents and dependents.

Convert text and validate and consolidate data.

Collaborate with others by protecting worksheets and workbooks.

Create, use, edit, and manage macros.

Import and export data.

Class Outline

Creating a Microsoft Excel Workbook

The Ribbon

The Backstage View (The File Menu)

The Quick Access Toolbar

Entering Data in Microsoft Excel Worksheets

Formatting Microsoft Excel Worksheets

Using Formulas in Microsoft Excel

Working with Rows and Columns

Editing Worksheets

Microsoft Excel 2013 New Features 1

Advanced Formulas

Working with Lists

Visualizing Your Data

Working with Tables

Advanced Formatting

Microsoft Excel 2013 New Features

Using Pivot Tables

Auditing Worksheets

Data Tools

Working with Others

Recording and Using Macros

2. Project Management with Oracle Primavera (P6)

Projects and programs are becoming increasingly complex. Economic uncertainty is putting a new level of pressure on teams and programs to execute well. Businesses are struggling to react quickly to fluctuating markets and changing business demands. Executives are demanding more project visibility. Distributed teams require around the-clock collaboration and coordination, as well as the ability to successfully navigate change throughout the project lifecycle. Today’s project and program managers need tools that deliver the necessary project insight to maintain project schedule and budget commitments. And they need the ability to integrate project and program resources with other departments and at other locations to ensure project success.

What will be learned

Oracle’s Primavera enterprise project portfolio management solutions enable project-driven organizations to intelligently manage their programs and projects—from small and simple to large and complex. Primavera solutions can help you make better portfolio management decisions by providing end-to-end, real-time visibility into all relevant information. You can determine whether you have sufficient resources and team members with the right skills to accomplish the work. Primavera solutions help you evaluate the risks and rewards associated with projects and programs. You get the project management, collaboration, and control capabilities you need to manage change and successfully deliver projects on time, within budget, and with the intended quality and design. Plus, you can interoperate with ease—across the enterprise—with Primavera’s flexible integration capabilities.

COURSE CONTENT

Part 1:

Overview and Configuration

Understanding Project Management........................................ .........3

Quick Tour.............................................. ............................................13

Defining Administrative Preferences and Categories.....................29

Setting User Preferences....................................... .............................49

Part 2:

Structuring Projects

Setting Up the Enterprise Project Structure...................................67

Setting Up the Organizational Breakdown Structure....................97

Defining Resources and Roles............................................. ............109

Reviewing Work Breakdown Structures.......................................1 33

Defining Budgets........................................... .................................

Part 3:

Implementing the Schedule

Establishing Activity Codes............................................. ...............

Working with Activities........................................ ...........................

Working with Cost Accounts and Project Expenses....................

Part 4:

Updating and Managing the Schedule

Managing Baselines......................................... ................................

Updating, Scheduling, and Leveling.......................................... .....

Summarizing Projects.......................................... ...........................

Managing Risks............................................. ...................................

Project Issues and Thresholds........................................ ................

Maintaining a Project’s Document Library..................................359

Tracking Projects.......................................... ...................................365

Comparing Projects with Claim Digger........................................375

Creating and Using Reflections....................................... ...............391

Checking Projects In and Out............................................... .........397

Part 5:

Customizing Projects

Working with Layouts........................................... ..........................407

Grouping, Sorting, and Filtering Data...........................................417

Customizing Layouts .................................................. .....................427

Customizing Reports........................................... ............................455

Printing Layouts and Reports........................................... ..............491

Publishing a Project on the World Wide Web...............................501

Linking the Project Management and Contract Manager

Who needs this training

All staff at managerial and supervisory level.

Project department staff

All engineers.

Accounts and financial department staff.

3. Microsoft project 2013

Microsoft Project Professional 2013 gives you powerful new ways to effectively manage important projects. Unlock easy collaboration capabilities to quickly start and deliver winning projects while leveraging the power of Office 365 or SharePoint to work from virtually anywhere. Make communication instantaneous through seamless integration of Lync 2013 to call or instant message team members from Project Professional. Extend Project’s functionality with Apps for Office to meet your specific business needs

What will be learned

Easily plan & manage
your projects with intuitive controls and flexible team tools to help your organization deliver the intended business value.

be efficient and prioritize
by aggregating everyday work, project tasks, important details, and timelines in a visually rich and contextual interface.

Manage anywhere
with tools to keep you connected with your team and on top of your projects while you’re on the go.

Deliver effective presentations
that offer immediate insight into task planning, resource allocation, cost efficiencies, and the many important details of your projects.

Anticipate Change
with forward-looking views into the everyday work going into your projects and the resources needed to get that work done.

Explore the Office Store
to quickly innovate with flexible options to customize and extend out-of-thebox capabilities

Course content

1: Projects: In the Beginning

2: Planning a Project

3: Getting to Know Microsoft Project.

4: Creating a Simple Project 5: Setting Up a Project File.

6: Identifying the Work to Be Done

7: Building a Schedule

8: Building a Team for Your Project

9: Assigning Resources to Tasks 10: Setting Up a Project Budget.

11: Reviewing and Fine-Tuning Your Plan.

.

12: Saving the Project Plan..

13: Tracking Status. ..

14: Evaluating and Correcting Project Performance

15: Managing Change.

16: Reporting on Projects. .

Who needs this training

1.All staff at managerial and supervisory level.

2.project department staff

3.All engineers.

4.accounts and financial department staff.

4. CAESAR II

(Equipment and pipe design and stress analysis)

CAESAR II is the leading pipe stress analysis software, especially in the oil and gas and power industries.

With its rich features, it enables the efficient and cost effective analysis of piping and pipelines. With the program, companies only carry out solutions to stress problems in an existing or to-be built piping and pipeline systems that are relatively cheap.

What to learn

The advantages that come with a proper CAESAR II knowledge are many. Some includes:

Trainees become familiar with international engineering codes and standards

Trainees understand the mechanism of piping material and system failure

Trainees are taught ways to resolve piping stress problems which do not hamper the energy side of the system

Best ways to optimize pump performance

Piping materials specification are also introduced and chemical properties analysed and so much more

Contents

i. Primary or sustained stress, and analysis(surface piping,buried pipe,subsea piping) ii. Secondary or expansion stresses iii. Thermal fatigue iv. Pump and compressor loading and stress analysis. v. Modal analysis vi. Harmonic analysis vii. Harmonic fatigue analysis viii. Fluid Hammer Who needs this training

1. Mechanical ,piping and structural maintenance engineers.

5. AUTOCAD & PIPING AND INSTRUMENTATION DIAGRAM (PNID)

Instrumentation is a process which ensures little human interaction with piping systems while automatically balancing process conditions.

What to learn

With PNID, designers can continuously update process database easily. Plant or process personnel can always remain updated even when they were not physically present during commissioning.

Contents

FULL PACKAGE AUTOCAD TRAINING

AUTOCAD 2D DRAFTING, DOCUMENT CONTROL,MANAGEMENT AND ISSUANCE OF DELIVERABLES

a. AutoCAD general

b.AutoCAD mechanical

c.AutoCAD PID piping and instrumentation design.

D.AutoCAD structural /architectural/geological

E.DOCUMENT COTROL, MANAGEMENT AND ISSUANCE OF DELIVERABLES

A. AutoCAD general.

1. Introduction to AutoCAD, and 2D drafting,

2. RASTERS AND VECTOR MANIPULATION

B. AUTOCAD MECHANICAL.

1. ENGINE BLOCK MODELING

2.GEARS BOLTS AND NUTS

4.INDUSTRIAL MODELING

C.AUTOCAD PID

1.SURF. (SUBSEA UMBLICALS, RISERS,AND FLOATERS,

2.ELBOWS AND TEES

3.PUMPS AND COMPRESSORS.

4. WELL HEAD AND PLATFORM MODELLING.

5. AUTOCAD PIPING ISOMETRICS AND DRAFTS

D.AUTOCAD CIVIL/STRUCTURAL/Geological

1. House plan and elevation

2.Geological mapping,

AUTOCAD 3D MODELLING ,RENDERING AND DWF USAGE

1. Introduction to 3d fundamentals

2. Modeling of structures (houses, bridges, masts etc)

3. Modeling of mechanical parts and components (locomotives, engine parts, pumps, vessels, heat exchangers, e.tc)

4. Modeling of piping components (elbows, tees, flange, reducer, valves, etc

5. Modeling of Oil facilities

6. Project and Assessment

7. Rendering

8. Using drawing web format

Getting started

Working with Projects

Creating a PNID

Annotating a PNID

Customizing Projects

Validating a PNID

Managing a Projects

Understanding PNID project data

Customizing Tags and Annotation

Understanding Line segments and Groups

Customizing Project Templates

Publishing and Printing PNIDs

Interpreting the PNID

Crafting PNIDs

Instrumenting processes

Who needs this training

E& I ENGINEERS.

PLANT OPERATORS.

MECHANICAL AND PROCESS AND CONTROL ENGINEERS.

6. ETAP –power system design and operations.

From design through deployment, demanding applications need ETAP

ETAP is trusted by more users, in the most demanding operations, than any other software provider

Clean, reliable electric power is the foundation of every organization's ability to deliver its products and services, in order to successfully achieve its goals. From the boardroom to the battlefield, ETAP has been "Powering Success" for more customers than any other software provider, by helping users to attain optimal reliability, safety, and energy efficiency from their power infrastructure.

For nearly 30 years, ETAP has been the most comprehensive and widely-used enterprise solution for the design, simulation, operation, control, optimization, and automation of generation, transmission, distribution, and industrial power systems.

More power system experts trust ETAP for their most demanding projects. Only ETAP enables users to successfully and cost-effectively conduct power system monitoring and predictive simulations, using their original ETAP design model and combining it with real-time data.

By every significant measure, ETAP is the largest power system software

company… and the only software provider worthy of your trust in your most demanding projects.

The Broadest Range of Industry Experience

Power systems engineering consulting

Process Industries:
Oil and Gas, Chemical, Cement, Pulp & Paper

Power & Energy:
Generation, Transmission, Distribution, Nuclear, Smart Grid, Microgrid

Industrial:
Manufacturing, Transportation, Metals & Mining

Mission Critical:
Data Centers, Operations Centers, Healthcare

Government & Education:
City/State/Federal infrastructure, Defense (including Net Zero), Universities

COURSE CONTENT

ETAP1

ETAP OVERVIEW.

•ONE LINE DIAGRAM.

•LOAD FLOW ANALYSIS.

SHORT CIRCUIT ANALYSIS.

UNBALANCED LOAD FLOW ANALYSIS.

DEVICE-COORDINATION SELECTIVITY.

CABLE SYSTEM REVIEW.

MOTOR ACCELERATION REVIEW ANALYSIS.

•LOAD FLOW MODELING.

DEVICE-COORDINATION.

•TRANSFORMER SIZING.

•GROUND GRID SYSTEM.

•LITERARY SYSTEM.

Who needs this training

POWER GENERATION AND DISTRIBUTION DEPARTMENT.

ALL ELECTRIAL ENGINEERS (POWER OPTIONS) ON SITE.

7. INVENTOR PROFESSIONAL

Autodesk Inventor professional is a computer aided manufacturing program which enables easy 3D design and manufacturing of mechanical components such as pipes, elbows, engines, frames etc.

What to learn

You will learn how to design and test-run mechanical products to be fabricated with state-of-the-art features.

Contents

What is Autodesk Inventor?

Understanding Autodesk Inventor User Interface

Autodesk Inventor File Types

Creating and Managing Project Files in Autodesk Inventor

Understanding Constraints in Autodesk Inventor - Part 1

Understanding Constraints in Autodesk Inventor - Part 2

Understand and Using Sketch Linetypes and Geometry in Autodesk Inventor

Types of Features in Autodesk Inventor

Navigation in Autodesk Inventor - Overview

Navigation in Autodesk Inventor - The PAN tool

Navigation in Autodesk Inventor - The ZOOM tool

Navigation in Autodesk Inventor - The ORBIT tool

Navigation in Autodesk Inventor - The SteeringWheel tool

Navigation in Autodesk Inventor - The Viewcube tool

Direct Manipulation in Autodesk Inventor

Boolean Operations in Autodesk Inventor

Using the Extrude Tool (Extrusion Feature)

Using the Extrude Tool (Extrusion Feature) - Part II

How to Share a Sketch in Autodesk Inventor

Redefining a Sketch Plane in Autodesk Inventor

Using the Revolve Tool ( Revolution Feature )

Using the Sweep Tool ( Swept Feature )

Using the Loft Tool ( Lofted Feature )

Using the Fillet Tool ( Fillet Feature ) - Overview

Using the Fillet Tool ( Fillet Feature ) - Part 2

Using the Fillet Tool ( Fillet Feature ) - Part 3

Using the Hole Tool ( Hole Feature )

Using the Thread Tool ( Thread Feature )

Using the Shell Tool ( Shell Feature )

Using the Emboss Tool ( Emboss Feature )

Creating a Cylinder at an Angle to a Hemisphere

Using and Understanding Work Planes in Autodesk Inventor

Using and Understanding Work Axes in Autodesk Inventor

Using and Understanding Work Points in Autodesk Inventor

Using and Understanding Grounded Work Point in Autodesk Inventor

Using and Understanding Parameters in Autodesk Inventor

Using and Understanding Linked Parameters in Autodesk Inventor

Autodesk Inventor Assembly Design Approach

Using Selection Priority Modes to Create Selection Sets in Autodesk Inventor

Setting Read and Write Permissions for Autodesk Inventor Style Libraries

Working With Visual Styles in Autodesk Inventor

Linking Parameters Between Parts and Assemblies in Autodesk Inventor

Autodesk Inventor Assembly Environment

Assembly Design Concepts

Assembling Your Design in Autodesk Inventor

Assembling with Fun In Autodesk Inventor

Who needs this training

1. FABRICATION ENGINEERS

2., MECHANICAL MAINTENANCE ENGINEERS

8. MATLAB

Mat lab is mathematical laboratory software for easily performing mathematical modelling which predicts physical processes. It enables the fast computation of complex models and data.

What to learn

You will learn how to perform basic maths operation

You will learn how to develop mathematical flow loops

You will learn how to do data analysi

Contents

Basic maths operation

Indexing

Mathematical flow control programming

Data analysis

Publishing M-scripts

Who needs this training

1. RESEARCH AND DEVELOPMENT ENGINEERS(R&D).

9. PDMS-PLANT DESIGN

MANAGEMENT SYSTEM(Aveva uk)

AVEVA PDMS™ is a datacentric, multi-discipline 3D plant design solution.

It has modules for the design

of equipment, piping, ducting, structure and cable trays. Modelling is carried out using customer defined

catalogues and specifications, in a fullcolour shaded 3D environment, with the support

of tools that ensure a clash-free design. A wide range of drawings, reports and Bills of Material can be produced directly from the 3D model, ensuring accuracy and consistency.

?

?

?

PDMS IS an engineering design,procurement and construction software.pdms can be used in

managing the entire life cycle of a plant.With pdms plants can be operated,maintenance done ,revamping carried out easily and plant information updated in 3D and accurately too in a short period of time.

With ever increasing global demand for products from process and power plants,

AVEVA PDMS™ enables companies to design, construct and maintain high quality plants quickly and efficiently.

Using PDMS, the logical model of a plant can be quickly and efficiently modelled into a full 3D design layout, where suitability and fit can all be tested in a virtual world, and the list of materials needed to construct the plant generated automatically.

PDMS enables teams of designers from a range of different disciplines to workconcurrently to develop a complete digital model of a process or power plant.

Each discipline works within its own specialist 3D environment, but is still able to view all of the design work taking place around them.

An extensive catalogue of predefined parametric components and objects can be quickly selected and positioned within the model, and then automatically

checked for clashes and integrity using configurable rules. Changes made as the design evolves are highlighted and tracked, making it easier to identify, manage and communicate the changes across the different disciplines. The end result is a more accurate, better quality design that helps avoid costly errors onsite.

What will be learned.

3D design of power plant.

Generate bill of quantity for piping, structures ,cable trays ,hvac 3. Generate 2D drafts of a plant

Ability to interpret drawings.

An understanding of plant layout.

How to produce as built drawings for maintenance or operation of plant.

An understanding of ASME standards and other relevant standards as well.

Course content

Equipment design

Piping layout and routing.

Configuration of beams and column, panel, civil works.

Design of hvac

Cable tray design and routing.

Generating isometric drafts and 2D drafts as well as bill of engineering materials from 3D models.

Interfacing with Autocad.

Who needs this training 1. Mechanical engineers 2. Utility engineers.

All personnel on mechanical, civil, structural & maintenance.

Process engineers and operators.

10. ORION COURSE OUTLINE

INTRODUCTION TO ORION

GENERAL ARRANGEMENT

OVER VIEW OF THE USER INTERFACE

GETTING STARTED-PROJECT PARAMETERS AND SETTINGS

CREATING AXIS

CREATING COLUNMS(RECTANGULAR AND CIRCULAR)

CREATING SHEAR WALL

CREATING BEAMS

CREATING CIRCULAR BEAMS

CREATING SLABS

CREATING SLAB STRIP

SLAB DESIGN

SLAB SECTIONING

USING TABLE TO EDIT MULTIPLE MEMBERS

APPLYING WALL LOAD

PRE ANALYSIS

ANALYSIS

POST ANALYSIS

BEAM REINFORCEMENT DESIGN

INTERACTIVE BEAM DESIGN

CREATING BEAM DETAIL DRAWING

COLUNM AND WALL REINFORCEMENT DESIGN

INTERACTIVE COLUNM DESIGN

CREATING COLUNM DETAIL DRAWING

FOUNDATION DESIGN

FOUNDATION DETAILING

GENERATING CALCULATION SHEET

EXPORTING TO AUTOCAD

COURSE REVIEW AND EXERCISE

11.STAADPRO COURSE OUTLINE

INTRODUCTION TO STAADPRO AND ITS GENERA FEATURES

AN OVERVIEW OF STAADPRO GUI

MODELLING IN STAADPRO USING CUT AND

MODELLING IN STAADPRO IMPRTING FROM AUTOCAD

SUPPORTS

MEMBER PROPERTIES

LOAD CASE AND LOAD CASE ASSIGNMENT

ANALYSIS AND DESIGN OF REINFORCED CONCRETE STRUCTURE

WORKING WITH INTERACTIVE DESIGN FOR CONCRETE

EXPORTING MEMBERS TO AUTOCAD

VIEWING CALCULATION SHEET

STEEL DESIGN(MAST,ROOF TRUSSES)

WORKING WITH INTERACTIVE DESIGN FOR STEEL

COURSE REVIEW AND PRACTICE EXERCISE

12.AUTOCAD CIVIL 3D COURSE OUTLINE

AN OVERVIEW OF CIVIL 3D INTERFACE

AN OVERVIEW OF SURVEY DATA

CREATING POINTS

CREATING SURFACE

CREATING ALIGNMENT

PROFILE

PARCEL

CORRIDOR ASSEMBLY

CREATING CORRIDOR

CREATING SECTION

CREATING INTERSECTION AND ROUNDABOUT

MATERIAL CALCULATION

PIPE NETWORK

PLAN PRODUCTION

13.Courses in Aspen hysys

HYSYS PROCESS (STEADY STATE)

Steady state process simulation ensures that optimal designs are identified, that equipment is performing per specification and to evaluate retrofits and improve the process. It can be used to rapidly screen alternative designs. A. HYSYS DYNAMICS:

Carryout dynamic transition state simulation of Oil & Gas and refining processes modeled in HYSYS. Determine optimum feed switch strategies, startups, and shutdowns, as well as properly assess safety procedures. Enhance design requirements by understanding tradeoffs between capital costs and operability using efficient modeling and optimization techniques.

HYSYS UPSTREAM:

Hysys upstream option provides industry standard methods and techniques for handling petroleum fluids and brings together the discipline of petroleum & process engineering Production field data can be input in an easy environment to create an asset wide model from the reservoir to the back end of the facilities.

ASPEN PLUS:

Design and Steady State Simulation and Optimization Process modeling tool for steady state simulation, design, performance monitoring, optimization and business planning for chemicals, specialty chemicals, petrochemicals and metallurgy industries.

Course content

Steady state

Introduction to HYSYS

Propane Refrigeration loop

Refrigerated Gas Plant

Gas Gathering

Two-Stage Compression

Acid Gas Sweetening with DEA

Natural Gas Dehydration with TEG

Reporting in Aspen HYSYS

15.HYSYS DYNAMIC SIMULATION

The dynamic simulation specifically handles equipment sizing and process control

REVISION OF STEADY STATE

BASIC CONTROL THEORY

PRESSURE-FLOW RELATIONSHIP

TRANSITIONING FROM STEADY STATE TO DYNAMICS-MODYFYING THE STEADY STATE

SIZING UNIT OPERATIONS (DE-PROPANIZER COLUMN, SEPERATORS etc)

USING THE DYNAMICS ASSISTANT AND ACTIVATING THE DYNAMIC MODE

INSTALLING THE CONTROLLERS (PID)

SETTING UP STRIP CHARTS

RUNNING AND MONITORING DYNAMIC SIMULATION.

ADVANCED DYNAMICS

Who needs this training

UTILITY ENGINEERS&.PROCESS ENGINEERS

PLANT OPERATORS.

MECHANICAL AND PROCESS AND CONTROL ENGINEERS.

17.SAP PLANT MAINTENANCE AND INVENTORY MANAGEMENT.

Efficient plant maintenance is vital to a company's ability to optimize and harmonize its production processes. For companies using SAP's R/3 system, the effective implementation and use of the Plant Maintenance (PM) component represents a strategy with considerable practical benefits. This course offers a clear introduction to this small but sophisticated component and provides a highly practical guide to implementing PM. Beginning with an examination of the key business processes underlying PM functionality, the Course goes on to cover all the crucial aspects of maintenance planning and execution in R/3. Particular attention is given to integrating plant maintenance with a company's natural process flow.

1. Classifying Plant Maintenance from a Business perspective 2.Objects in R/3 PM

BP: Breakdown Maintenance and Corrective Maintenance

BP: Planned Maintenance

Integrative Aspects

Interfaces to Non-SAP Systems

OR

SAP-INVENTORY MANAGEMENT

Basic Overview

Procurement Process in SAP MM

Invoicing

Materials Requirements Planning (MRP) 5. Reporting in SAP MM

Who needs this training

1.Project adminstrators.

2.Procurement and accounts. DEPT.

18.SAFETY TRAINING-OSHA.

WE REPRESENT OCCUPATIONAL

SAFETY AND HEALTH ACADEMY USA AS

AN AUTHORIZED TRAINING PROVIDER (ATP)

WE TRAIN ON ALL SAFETY COURSES AS PRESCRIBED BY OSHACADEMY USA.

VISIT :^{www.oshatrain.org} for details.

Who needs this training

EVERYONE ON THE PLANT.

19.PETREL(SEISMIC INTERPRETATION AND ,GEOSTATIC MODELLING

1 Theoretical principle of reservoir estimation. (VOLUME CALCUATION,MATERIAL BALANCE)

2 introduction to petrel seismic to simulation software.

3 Importation of data and QC.

4.seimic interpretation

A. Surface interpretation

B. Fault interpretation

5. Structural modeling(faults ,vertical layering)

6. Grid Property modeling (porosity, permeability, N/G, SW facies)

7. Definition of fluid contacts.

8. Reservoir mapping. PLOTTING

9. Pay zone insitu volume calculation.

10.Setting up a simulation case in petrel and exporting for eclipse 100 black oil isothermal

Simulator.

20.ECLIPSE DYNAMIC RESERVOIR SIMULATION (PREDICTION & HISTORY MATCHING)

A .An Introduction to dynamic ISOTHERMAL BLACK OIL simulation (ECLIPSE 100)

B. The DIFFUSSIVITY(darcy law) equation& MB. Equations(EOS)-redleich –kwang,peng-robinson ,vanderwaal......

C.Introduction to Eclipse and Eclipse family of softwares(eclipse 100,300,PVTi fluid characterization,office etc.)

D, understanding and coding eclipse using notepad.( ascii method ,include files .

1.The runspec,

2. grid section.(grid)permx,permy,permz,porosity………

3.properties section,(Liveoil PVTO,DEADOIL PVCDO,FLASH PARAMETERIZATION)

4. solution -initialization section(EQUILIBRATION,DEFINING AQUIFERS)

5. Schedule section (Prediction simulation/HISTORY MATCHING).

6.Summary section (OUTPUT OF SIMULATION RESULTS,FIELD,WELL AND BLOCK PRODUCTION E.T.C

7, Running a case generated in petrel in eclipse(gullfaks oil field, Egypt oil field )

8.Introduction to eclipse office

9. Building & running a prediction&HISTORY MATCH model of CASE STUDIES OF large reservoir WITH AQUIFER in eclipse

10.Building and running artificial gas lift operation in eclipse.

11.Running API TRACKING simulation in eclipse.

12. Brine injection (artificial lift)

13. technical discussion and interpretation of graph(PVT,SATURATION,PRODUCTION etc)

21. PROSPER

PROSPER is a well performance, design and optimisation program for modelling most types of well configurations found in the worldwide oil and gas industry today. PROSPER can assist the production or reservoir engineer to predict tubing and pipeline hydraulics and temperatures with accuracy and speed. PROSPER's sensitivity calculation features enable existing well designs to be optimised and the effects of future changes in system parameters to be assessed.

PROSPER is designed to allow building of reliable and consistent well models, with the ability to address each aspect of well bore modelling viz; PVT (fluid characterisation), VLP correlations (for calculation of flowline and tubing pressure loss) and IPR (reservoir inflow). By modelling each component of the producing well system, the User can verify each model subsystem by performance matching. Once a well system model has been tuned to real field data, PROSPER can be confidently used to model the well in different scenarios and to make forward predictions of reservoir pressure based on surface production data.

With PROSPER detailed flow assurance can be studied at well and surface pipeline level. PROSPER provides unique matching features which tune PVT, multiphase flow correlations and IPR to match measured field data, allowing a consistent model to be built prior to use in prediction (sensitivities or artificial lift design).

Production System Analysis

· Inflow performance models (IPR)s

· Horizontal well with pressure drop in well

· Multi-layer with pressure drop in well

· Hydraulic fracture

· Time dependant IPR

· Multi-laterals

· Dual porosity

· Outflow

· Pipe stability calculations

· Proprietary well pressure drops model -

· PVT - Oil, Gas, Condensate - Black Oil or Fully Compositional

· Tubing and pipeline quality check

· Sensitivity analysis

Well Types

· Gas, oil, water, condensate, steam, injection wells

· Naturally flowing

· Artificially lifted

· Multi-layer

· Multi-lateral

· Angled and horizontal

Artificial Lift System Analysis and Design

· Electric Submersible Pump - ESP

· Gas Lift

· Hydraulic Pumps - HSP

· Progressive Cavity Pumps - PCP

· Jet Pumps

· Beam Pumps - Rod

· Design new artificial lift systems

· Verify the efficiency of existing system.

22.GAP

GAP is a multiphase oil and gas optimiser tool that models the surface gathering network of field production systems. When linked with the well models of 23.PROSPER and reservoir models of MBAL a full field production optimisation and forecast can be achieved. GAP can model production systems containing oil, gas and condensate, in addition to gas or water injection systems.

GAP's powerful non-linear optimisation engine allocates gas for gas lifted wells or sets wellhead chokes for naturally flowing wells to maximise revenue or oil/gas production while honouring constraints at any level in the system.

Multi-well optimisation for artificially lifted and naturally flowing production networks:

Surface gathering system models with constraints

Looped networks

Gas and condensate gathering systems

Oil and water gathering systems

Injections networks

Compressor modelling

Pump modeling

Optimisation of gathering system against constraints:

Fast and robust Global Optimisation algorithm using non-linear programming (NLP) which has been recognised in the industry as best in class.

Wellhead chokes can be set, compressors and pumps optimised, and gas for gas lifted wells allocated to maximise production

Multiple Flowlines

Multiple Separators

Unlimited number of nodes - wells, reservoir, etc.

Field optimisation studies with mixed systems (ESP, GL, Naturally Flowing, PCP, Jet and Rod Pumps)

Optimise production forecasting

Pipeline Flow Assurance Studies

Reservoir Management

Models injection system performance, using MBAL or other numerical reservoir models

Advises on wellhead chokes settings to meet reservoir management targets

Fully Compositional from the Reservoir to the Process side

Easy to use graphical interface for drawing system network (using icons for separators, compressors, pipelines, manifolds and wells, inline chokes and reservoir tanks)

24.SAGE 50

Session 1 Introduction and initialization, setting your preferences and security

? Session 2 Using the Charts of Accounts and Nominal Codes

? Session 3 Setting up Customer and Supplier records

? Session 4 Creating and Processing Sales Invoices, Processing Purchase Invoices

? Session 5 Processing Customer Receipts and Supplier Payments

? Session 6 Processing Bank Payments and Receipts, Petty Cash, Transfers

? Session 7 Prepayment, Accruals, Month End, Nominal Reports and Trial Balance

? Session 8 Completing your VAT return, Management Reports and Audit Trail

25.PIPESIM-pipeline simulation ,surface and sub-surface piping simulation

1.INTRODUCTION to pipesim

2.SINGLE PHASE FLUID MODELING-WATER,GAS OIL

3.WELL PERFORMANCE MODELING.

4.ARTIFICIAL LIFT DESIGNS.

5.SINGLE BRANCH PIPELINE AND FACILITIES

6.NETWORK MODELLING-

?

?

Contact& TRAINING BATCH START DATES;

Each of the programs below fit into this schedule call us to enroll

MAY 2016-AUGUST 2016

MAY 2016

MONDAY -2ND MAY

----------- 16^{TH MAY

------------30TH MAY2016

JUNE 2016

-----------7TH JUNE 2016

-----------14TH JUNE

MONDAY -27TH JUNE 2016

JULY 2016

MONDAY-4TH JULY 2016

MONDAY-11TH JULY 2016

MONDAY -25TH JULY 2016

AUGUST 2016

MONDAY -1TH AUGUST 2016

MONDAY 8TH AUGUST 2016

MONDAY-29TH AUGUST 2016.

Contact;

Telephone -,08038812638,07051852201,08064673745

Email;[email protected],[email protected]

Office address-Eldemuz engineering centre,

1st floor ,60 Aba road ,by craft centre busstop ,portharcourt,

Rivers state, Nigeria}