Oil field& well production simulation -prosper,mbal ,gap training-ph-jan-aug 2019

OIL FIELD& WELL PRODUCTION SIMULATION -PROSPER,MBAL ,GAP TRAINING-PH-JAN-AUG 2019

PROSPER (10 Days)
PROSPER is a well performance, design and optimisation program for modelling most types of well configurations found in the worldwide oil and gas industry today. PROSPER can assist the production or reservoir engineer to predict tubing and pipeline hydraulics and temperatures with accuracy and speed. PROSPER's sensitivity calculation features enable existing well designs to be optimised and the effects of future changes in system parameters to be assessed.
PROSPER is designed to allow building of reliable and consistent well models, with the ability to address each aspect of well bore modelling viz; PVT (fluid characterisation), VLP correlations (for calculation of flowline and tubing pressure loss) and IPR (reservoir inflow). By modelling each component of the producing well system, the User can verify each model subsystem by performance matching. Once a well system model has been tuned to real field data, PROSPER can be confidently used to model the well in different scenarios and to make forward predictions of reservoir pressure based on surface production data.
With PROSPER detailed flow assurance can be studied at well and surface pipeline level. PROSPER provides unique matching features which tune PVT, multiphase flow correlations and IPR to match measured field data, allowing a consistent model to be built prior to use in prediction (sensitivities or artificial lift design).
16.1. Production System Analysis

• Inflow performance models (IPR)s
• Horizontal well with pressure drop in well
• Multi-layer with pressure drop in well
• Hydraulic fracture
• Time dependant IPR
• Multi-laterals
• Dual porosity
• Outflow
• Pipe stability calculations
• Proprietary well pressure drops model -
• PVT - Oil, Gas, Condensate - Black Oil or Fully Compositional
• Tubing and pipeline quality check
• Sensitivity analysis

16.2. Well Types

• Gas, oil, water, condensate, steam, injection wells
• Naturally flowing
• Artificially lifted
• Multi-layer
• Multi-lateral
• Angled and horizontal

16.3. Artificial Lift System Analysis and Design

• Electric Submersible Pump - ESP
• Gas Lift
• Hydraulic Pumps - HSP
• Progressive Cavity Pumps - PCP
• Jet Pumps
• Beam Pumps - Rod
• Design new artificial lift systems
• Verify the efficiency of existing system.

1. GAP (6 Days)

GAP is a multiphase oil and gas optimiser tool that models the surface gathering network of field production systems. When linked with the well models of PROSPER and reservoir models of MBAL a full field production optimisation and forecast can be achieved. GAP can model production systems containing oil, gas and condensate, in addition to gas or water injection systems.
GAP's powerful non-linear optimisation engine allocates gas for gas lifted wells or sets wellhead chokes for naturally flowing wells to maximise revenue or oil/gas production while honouring constraints at any level in the system.

1. Multi-well optimization for artificially lifted and naturally flowing production networks:
   
   • Surface gathering system models with constraints
   • Looped networks
   • Gas and condensate gathering systems
   • Oil and water gathering systems
   • Injections networks
   • Compressor modelling
   • Pump modeling

1. Optimisation of gathering system against constraints:
   
   • Fast and robust Global Optimisation algorithm using non-linear programming (NLP) which has been recognised in the industry as best in class.
   • Wellhead chokes can be set, compressors and pumps optimised, and gas for gas lifted wells allocated to maximise production
   • Multiple Flowlines
   • Multiple Separators
   • Unlimited number of nodes - wells, reservoir, etc.
   • Field optimisation studies with mixed systems (ESP, GL, Naturally Flowing, PCP, Jet and Rod Pumps)
   • Optimise production forecasting
   
   
2. Pipeline Flow Assurance Studies
3. Reservoir Management
   
   • Models injection system performance, using MBAL or other numerical reservoir models
   • Advises on wellhead chokes settings to meet reservoir management targets
   
   
4. Fully Compositional from the Reservoir to the Process side

Easy to use graphical interface for drawing system network (using icons for separators, compressors, pipelines, manifolds and wells, inline chokes and reservoir tanks

VENUE: Eldemuz Engineering centre
1st floor 60 Aba road by craft centre busstop Portharcourt,

DATE: start dates January-Friday 4^th January , 14^th January,2019,

1. 4^th& 18th febuary 2019,
2. 4^th& 18th March 2019,
3. 1^st & 22^nd April 2019,
4. 6^th &20^th May 2019,
5. 3^rd &24^th June 2019,
6. 1^st &22^nd July 2019,
7. 5^th &26^th August 2019.

Contact:Visit .ng for more details,call 08038812638,or email :[email protected]

08038812638

08038812638

08038812638

08038812638

08038812638