Advance HYSYS simulation

For more info contact: Tel: 08133476558, 07085740887
Address: Opebi, Ikeja, Lagos State, Nigeria
Email: vogwconcept50 (at) gmail.com




Practical class - Advance HYSYS simulation

(1) •Thermodynamic properties of process simulation
• The basic modules of process modelling
The 10 modules
• Oil characterization environment
• Defining compositional input
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG
• Reporting in HYSYS

• Steady State modelling and simulation using dummy projects
• Introduction to Unit Operations Sizing

(2) Dynamic Simulation and Control Theory
• Pressure-Flow specification
• Transitioning From Steady State to Dynamics-Modifying the Steady State
• Dynamic Mode
• Installing the Controllers (PID)
• Setting up Strip Charts
• Running and Monitoring Dynamic Simulation.
• Tuning parameters and designing your controller
•feed forward, feedback, cascade controller design and configuration e.t.c
(3) Mid-stream (Refining) simulation
Pump around phenomenon
Side stripper installation
Defining dynamic in refining model

(4) • Optimization
• Primary variables


• Objective function
• Constrains
• Spread sheet
• Functions

e.t.c





For more info contact: Tel: 08133476558, 07085740887
Address: Opebi, Ikeja, Lagos State, Nigeria
Email: vogwconcept50 (at) gmail.com

For more info contact: Tel: 08133476558, 07085740887
Address: Opebi, Ikeja, Lagos State, Nigeria
Email: vogwconcept50 (at) gmail.com




Practical class - Advance HYSYS simulation

(1) •Thermodynamic properties of process simulation
• The basic modules of process modelling
The 10 modules
• Oil characterization environment
• Defining compositional input
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG
• Reporting in HYSYS

• Steady State modelling and simulation using dummy projects
• Introduction to Unit Operations Sizing

(2) Dynamic Simulation and Control Theory
• Pressure-Flow specification
• Transitioning From Steady State to Dynamics-Modifying the Steady State
• Dynamic Mode
• Installing the Controllers (PID)
• Setting up Strip Charts
• Running and Monitoring Dynamic Simulation.
• Tuning parameters and designing your controller
•feed forward, feedback, cascade controller design and configuration e.t.c
(3) Mid-stream (Refining) simulation
Pump around phenomenon
Side stripper installation
Defining dynamic in refining model

(4) • Optimization
• Primary variables


• Objective function
• Constrains
• Spread sheet
• Functions

e.t.c





For more info contact: Tel: 08133476558, 07085740887
Address: Opebi, Ikeja, Lagos State, Nigeria
Email: vogwconcept50 (at) gmail.com