Programmable Logic Controllers (PLC) and SCADA Training
1. Programmable Logic Controllers Training
Programmable Logic Controller - PLC Duration Min of 2/3weeks
3hours per lesson. Regular/Alternate or Sat/Sunday
Fee: Call for fee
99% practical oriented
Programmable Logic Controllers is a heart of modern automation systems.
The Plcs Training Course contents
>> Introduction to PLC
>> Introduction to Block diagram, PFD and P& ID
>> Architectural Evolution of PLC
>> Introduction to the field devices attached to PLC
>> PLC Fundamentals - (Block diagram of PLC's)
>> Role of PLC in automation
>> Detail information about PLC components
* Power supply * CPU
* I/O modules * Communication bus
>> Various ranges available in PLCs
>> Types of Inputs & outputs
>> Source Sink Concept in PLC
>> Concept of flags
>> Scan cycle execution
Practical Exposure to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c
>> Introduction to PLC programming software
>> The concept of logic gate principle
>> ladder logic and functional block principle
>> Addressing concepts
>> Introduction to bit, byte & word concept
>> Programming instructions arithmetic and logical
* Load /and /or/out / and Read / Write * MOVE block application
* Compare / Add / Sub /And /Or - Blocks * Advanced instructions
* Leading edge / trailing edge instructions * File handling
* Timer Blocks programming * Comment functions
* Master control /set /reset function * Counter Block programming
>> Upload, download, Monitoring of programs
>> Forcing I/P & O/P
>> Monitoring / Modifying data table values
>> PLC and Panel wiring
>> Hands on experience on writing programs
* Case studies for conveyer, motors control, timer & counter
applications etc.
>> Troubleshooting and fault diagnostics of PLC
>> Documenting the project
>> Program assignments for real time applications
* Special: P & ID design
* Profibus configuration
Practical work and industrial projects
NB: Fee and conditions of services are subject to change without prior notice
2. SCADA Training - Supervisory Control & Data Acquisition
SCADA Training Course contents
>> Applications of SCADA software
>> Different packages available with I/O structure
>> Features of SCADA software
Application development in Wonderware InTouch/ Siemens WinCC
>>Creating a new SCADA application
>> Creating Database of Tags
>> Creating & Editing graphic display with animation
* Data Entry / Start Stop command * Analog entry
* Sizing * Movement
* Blinking * Visibility
* Filling
>>Trending
* Creating & Accessing Real-time Trends
* Creating & Accessing Historical Trends
>> Creating Alarms & Events
>> Writing logic through script
* Application script * Condition
* Data Change * Window script
* Special functions
>> Connectivity with the different hardware
* Communication protocols
* Communication with PLC
* Communication with Data Acquisition System
>> Connectivity between software
* Communication with Excel
* Communication with Visual Basic
>> Commissioning the network nodes
>> Troubleshooting the application
Practical work and industrial projects
NB: Fee and conditions of services are subject to change without prior notice
Contact us:
Address: Suite 28, No 4 Irewole street,
Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
Tel: 08133476558, 07085740887
Email: [email protected], [email protected]
website: www.Vogwconcept.Com
1. Programmable Logic Controllers Training
Programmable Logic Controller - PLC Duration Min of 2/3weeks
3hours per lesson. Regular/Alternate or Sat/Sunday
Fee: Call for fee
99% practical oriented
Programmable Logic Controllers is a heart of modern automation systems.
The Plcs Training Course contents
>> Introduction to PLC
>> Introduction to Block diagram, PFD and P& ID
>> Architectural Evolution of PLC
>> Introduction to the field devices attached to PLC
>> PLC Fundamentals - (Block diagram of PLC's)
>> Role of PLC in automation
>> Detail information about PLC components
* Power supply * CPU
* I/O modules * Communication bus
>> Various ranges available in PLCs
>> Types of Inputs & outputs
>> Source Sink Concept in PLC
>> Concept of flags
>> Scan cycle execution
Practical Exposure to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c
>> Introduction to PLC programming software
>> The concept of logic gate principle
>> ladder logic and functional block principle
>> Addressing concepts
>> Introduction to bit, byte & word concept
>> Programming instructions arithmetic and logical
* Load /and /or/out / and Read / Write * MOVE block application
* Compare / Add / Sub /And /Or - Blocks * Advanced instructions
* Leading edge / trailing edge instructions * File handling
* Timer Blocks programming * Comment functions
* Master control /set /reset function * Counter Block programming
>> Upload, download, Monitoring of programs
>> Forcing I/P & O/P
>> Monitoring / Modifying data table values
>> PLC and Panel wiring
>> Hands on experience on writing programs
* Case studies for conveyer, motors control, timer & counter
applications etc.
>> Troubleshooting and fault diagnostics of PLC
>> Documenting the project
>> Program assignments for real time applications
* Special: P & ID design
* Profibus configuration
Practical work and industrial projects
NB: Fee and conditions of services are subject to change without prior notice
2. SCADA Training - Supervisory Control & Data Acquisition
SCADA Training Course contents
>> Applications of SCADA software
>> Different packages available with I/O structure
>> Features of SCADA software
Application development in Wonderware InTouch/ Siemens WinCC
>>Creating a new SCADA application
>> Creating Database of Tags
>> Creating & Editing graphic display with animation
* Data Entry / Start Stop command * Analog entry
* Sizing * Movement
* Blinking * Visibility
* Filling
>>Trending
* Creating & Accessing Real-time Trends
* Creating & Accessing Historical Trends
>> Creating Alarms & Events
>> Writing logic through script
* Application script * Condition
* Data Change * Window script
* Special functions
>> Connectivity with the different hardware
* Communication protocols
* Communication with PLC
* Communication with Data Acquisition System
>> Connectivity between software
* Communication with Excel
* Communication with Visual Basic
>> Commissioning the network nodes
>> Troubleshooting the application
Practical work and industrial projects
NB: Fee and conditions of services are subject to change without prior notice
Contact us:
Address: Suite 28, No 4 Irewole street,
Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
Tel: 08133476558, 07085740887
Email: [email protected], [email protected]
website: www.Vogwconcept.Com
