Opportunities for oil & gas software training in lagos
GEOKEN TECH SERVICES TRAINING COURSES
| | TARGET AUDIENCE |
| 1 | AUTOCAD (2D/3D) | Mechanical, Electrical, Material& Metallurgical Engineers/Trainee |
| 2 | PIPING DESIGN (PDMS) | Mechanical, Chemical, Process Engineers/Trainee |
| 3 | PROCESS DESIGN & OPTIMIZATION(HYSYS) | Process, Chemical Engineers/Trainee |
| 4 | RESERVOIR MODELING & WELL LOGGING(PETREL) | Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee |
| 5 | PIPING &INSTRUMENTATION DESIGN (P&ID) | Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee |
| 6 | GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING | Geologist, Geophysicist,Hydrogeologist, Civil/water engineer |
2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULE
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface
•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs
Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.
3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
·Introduction to Plant Equipments type
·Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
·Taking coordinate/Equipments position from plant plan drawing (GAD)
·Using the Primitive method to design Equipments
·Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
·Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
·Piping Setting( Head/Tail setting)
·Pipe specification in PDMS
·Pipe Routing (Linking equipments with pipes)
·Modifying the Head/Tail of a Pipe
·Supporting Plant with Structures (Beams, Columns, Slab)
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
·Introduction to Aspen Hysys
·Hysys working Environment
·Adding component to workflow
·Adding Fluid package
·Entering Hysys Simulation Environment
·Adding material and Energy stream
·Building Simulation
·Analyze the Property Using case Study
·Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
·Equilibrium Reaction
·Working on Hysys Project
5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)
COURSE MODULE:
· Introduction to P&ID workspace · P&ID Tools Palette · Creating a New P&ID Project · Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space · Connecting Equipments together with Process line · Assigning Tags to Equipments and Specification to process lines · Placing control instruments to process lines, Equipments and on control valves · Checking for Errors by running validation
6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and
Interpretation using appropriate Geophysical/Geotechnical Software’s.
7: STRCUTURAL DESIGN USING STAADPRO, ORION
Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout,
Lekki Expressway, Lagos.
Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza
Ikotun, Lagos
Training Schedules/Dates: 1st batch of training start, Second batch (19th March – 4th April, 2017)
[email protected]
www.geokentech.com
call ( 08060360538, 08028553955) For registration details
GEOKEN TECH SERVICES TRAINING COURSES
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, below bare the Important software application use in the industry
| COURSE | TARGET AUDIENCE |
| 1 | AUTOCAD (2D/3D) | Mechanical, Electrical, Material& Metallurgical Engineers/Trainee |
| 2 | PIPING DESIGN (PDMS) | Mechanical, Chemical, Process Engineers/Trainee |
| 3 | PROCESS DESIGN & OPTIMIZATION(HYSYS) | Process, Chemical Engineers/Trainee |
| 4 | RESERVOIR MODELING & WELL LOGGING(PETREL) | Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee |
| 5 | PIPING &INSTRUMENTATION DESIGN (P&ID) | Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee |
6
| GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING | Geologist, Geophysicist,Hydrogeologist, Civil/water engineer |
COURSE MODULE( AUTOCAD 2D/3D)
Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
- Introduction to AutoCAD 2d Toolbar
- Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
- Setting AutoCAD drawing Limits
- Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
- Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
- Introduction to Isometric drawing
- Drawing, dimensioning and editing Isometric drawing
- Introduction to AUTOCAD 3D
- AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
- Creating solid object with AutoCAD 3d tools
- Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
- Rendering of Solid objects
2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULE
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface
•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs
Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.
3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
·Introduction to Plant Equipments type
·Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
·Taking coordinate/Equipments position from plant plan drawing (GAD)
·Using the Primitive method to design Equipments
·Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
·Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
·Piping Setting( Head/Tail setting)
·Pipe specification in PDMS
·Pipe Routing (Linking equipments with pipes)
·Modifying the Head/Tail of a Pipe
·Supporting Plant with Structures (Beams, Columns, Slab)
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
·Introduction to Aspen Hysys
·Hysys working Environment
·Adding component to workflow
·Adding Fluid package
·Entering Hysys Simulation Environment
·Adding material and Energy stream
·Building Simulation
·Analyze the Property Using case Study
·Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
·Equilibrium Reaction
·Working on Hysys Project
5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)
COURSE MODULE:
- Introduction to P&ID workspace
- P&ID Tools Palette
- Creating a New P&ID Project
- Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
- Connecting Equipments together with Process line
- Assigning Tags to Equipments and Specification to process lines
- Placing control instruments to process lines, Equipments and on control valves
- Checking for Errors by running validation
6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and
Interpretation using appropriate Geophysical/Geotechnical Software’s.
7: STRCUTURAL DESIGN USING STAADPRO, ORION
Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout,
Lekki Expressway, Lagos.
Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza
Ikotun, Lagos
Training Schedules/Dates: 1st batch of training start, Second batch (19th March – 4th April, 2017)
[email protected]
www.geokentech.com
call ( 08060360538, 08028553955) For registration details
