Non destructive test (ndt) engineers

NON DESTRUCTIVE TEST (NDT) TRAINING
NDT Training and Certification:- NDT is a specialized branch of engineering science which use of non invasive techniques to determine the integrity of a material, component or structure without impairing its usefulness and is an integral part of Quality Assurance and Quality Control. It confirms quality of materials such as structural beams, pipes, plates, valves, nozzles etc. used in construction of industrial equipments. It also confirms quality of fabrication and joining process where testing of welds is of major importance. General procedure for NDT has given in ASME Section V and engineers have to follow these procedures for each NDT methods. Hence NDT training and certification is a must for QA/QC Engineers.
We conduct NDT certification as per the requirements of ASNT - SNT TC 1A 2006 and other standards.
Non-Destructive Testing Courses as per SNT-TC-1A Edition-2006
ASNT Level-I & Level-II
> Penetrant Testing
> Magnetic Particle Testing
> Radiographic Testing
> Ultrasonic Testing
> Visual Testing

Join now & become an inspection engineer to work in Oil & Gas Industries, Cement, Power Plant, Construction, Fabrication, Casting, Forging unit. Etc. We offer training program in Certification course in Inspection Engineering’s. Opportunities are open.
ELIGIBILITY
Post Graduates, Engineering Graduates and Diploma Holders are eligible for this course and persons interested in changing their career and also any Graduate Inter & SSC are also eligible.
TRAINING: What It Takes to Make It Happen
• Technicians wanting to further their NDT qualifications need to minimize billable hours lost to training efforts;
• Managers who oversee third party inspection processes need concise information that is immediately useful;
• Employers with globally positioned employees require easy access to training opportunities; and
• Individuals wanting to start a first or new career, have to balance hours spent training and their current occupation.
Each situation requires a unique way to deliver critical information and what might be a perfectly acceptable delivery method for one is untenable for another. Consequently, the courses have been designed for a wide variety of people and the demands that their diverse schedules dictate
COURSE OUTLINE
MAGNETIC PARTICLE TESTING:

• Introduction
• Theory on Magnetism
• Magnetic Field
• Permanent magnets and electromagnets
• Hysteresis Loop
• Diamagnetic, paramagnetic and
• ferromagnetic materials
• Circular and longitudinal magnetization
• Principle of magnetic Particle Testing
• Familiarization of common magnetic particle
• equipments
• Detecting medium
• Demagnetization
• Usage of black light for inspection
• Codes, standards and specification
• Evaluation of Defects
• Preparation of test reports

PENETRANT TESTING:

• Introduction
• Principle of magnetic Particle Testing
• Methods of Pre-cleaning
• Properties of penetrant
• Types of penetrant
• Methods of penetrant application
• Methods for removal of excess penetrant
• Methods for drying
• Properties of developers
• Types of developers
• Methods for developer application
• Inspection requirements
• Post cleaning
• Usage of black light for inspection
• Familiarization of various penetrant systems
• Codes, standards and specification
• Evaluation of Defects
• Preparation of test reports

RADIOGRAPHIC TESTING:

• Introduction
• Structure of Atom
• Production of X-ray and Gamma Ray
• Radiation Safety and work permit system
• Interaction of radiation with matter
• Radiation detection and measurement
• Biological Effects of Radiation
• Regulations on use of radiography sources
• Elements of industrial radiography
• Geometrical principles in image quality
• Selection of radiation source
• Control of scattered radiation
• Use of Image quality Indicators
• Selection of radiography films
• Film Processing
• Radiographic Techniques
• Plate Radiography
• Structure Radiography
• Pipe Radiography
• Pipeline Radiography
• Radiography of castings
• Radiography of tanks and vessels
• Calculation of exposure time
• Special Radiographic Techniques
• Codes, standards and specification
• Radiographic Test Film Interpretation
• Welding
• Castings
• Preparation of test reports

ULTRASONIC TESTING:

• Introduction
• Theory on Sound
• Wave theory
• Types of sound waves
• Velocity of sound in material
• Amplitude of sound
• Modes of sound waves
• Reflection
• Transmission
• Refraction
• Diffraction
• Absorption
• Scattering
• Attenuation
• Mode conversion
• Familiarization of common ultrasonic equipments
• Familiarization of ultrasonic testing probes
• Familiarization of Calibration Standards
• Training on A Scan Equipment
• What is A scan display?
• Production of ultrasound
• Types of probes
• Features of probes
• Profile of sound (Near field, far field and Dead Zone)
• Selection of probe diameter
• Selection of probe frequency
• Sensitivity
• Practical:
• Calibration of equipment
• Setting up of test sensitivity
• Thickness / dimensional measurement
• Corrosion Scan
• Lamination Check
• Weld Scan on plate and pipe
• Defect Identification
• Defect Sizing
• Codes, standards and specification
• Evaluation of Defects
• Preparation of test reports

DATE: 15th Sept 2014
Time is 8am to 5pm daily
Cost: 260,000 (UT, VT, MPI, PT & RT) (Covers for materials, training, certificate, breakfast and lunch)
Ultrasonic Testing : – 75,000
Radiographic Testing/ Radiographic film interpretation: - 60,000
Magnetic Particle Testing: - 45,000
Penetrant Testing: - 45,000
Visual Testing: - 35,000

FOR MORE INFO: CALL 07035816455 ([email protected])
www.hightechng.com

Self development is the key to success

Call or mail us for your enquiries.

Don't miss this opportunity...

www.hightechng.com

Get a reputable skill backed by an international certificate.

Don't miss this opportunity, call us now

Registration is on going, don't miss out..

Always visit our site for information... www.hightechng.com

www.hightechng.com

Self development is the key to self reliance

Follow us on our website at www.hightechng.com

Build a career of your future with us... www.hightechng.com

Registration is on going... book your class now

Make haste and book now... happy weekend

www.hightechng.com for more info
...

Booking is still on...

Call now to book the class...

Happy weekend and holiday ppl... thanks for all the calls. Keep them coming

Booking in progress... call 07035816455 for more info

www.hightechng.com.... hands on skill purely international

Check our site and read our testimonials.... wwww.hightechng.com

Build a reputable skill with internationally recognized certificate with us..

Booking in progress... don't miss the class

If you haven't booked your class... you still have opportunity.... good morning

Self development is the key to self reliance

It's not about your certificate, it's about your skill

Build a career of your future with us... www.hightechng.com

Build a reputable skill with internationally recognized certificate with us..

Follow us on our website at www.hightechng.com

Registration still in progress... www.hightechng.com

If you haven't booked your class... you still have opportunity.... good morning

Final registration ends this week.... last minute registration in progress

Build a career of your future with us... www.hightechng.com

If you haven't booked your class... you still have opportunity.... good morning

www.hightechng.com

Registration ends today. Cheers