Autocad training and engineering training in ph
1.PLANT/PIPE DESIGN AND STRESS ANALYSIS (PDMS & CAESARII)
PDMS SCOPE
PDMS is the Vantage Plant Design 3D modeling application. It is a definitive 3D design and visualization solution.
It enables plant design personnel of various disciplines work actively together to eliminate structural interference, check safety and operational issues
during the design phase.
These ensure easy maintenance of facilities whilst taking cognizance of any human factors.
This course is designed to provide an understanding of PDMS for 3D Modeling and its application in Oil and Gas facilities. 3D modeling technology will be
introduced using PDMS.
The participant will be trained to appreciate the use of PDMS in developing Structural, Piping, Electrical and Instrumentation components as an introduction
to the necessary skills to optimize PDMS in the detailed Engineering of Oil and Gas facilities
1. In the Design module which is the graphical constructor we will cover the following discipline specific simulation applications.
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors)for civil
And structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
The training will be based on ASME B31.3 &B31.4 CODE.
At the end of the training, a PILOT project on modeling of an liquefied petroleum gas plant (COOKING GAS PLANT) will be carried out by the trainee.1.PLANT/PIPE DESIGN AND STRESS ANALYSIS (PDMS & CAESARII)
PDMS SCOPE
PDMS is the Vantage Plant Design 3D modeling application. It is a definitive 3D design and visualization solution.
It enables plant design personnel of various disciplines work actively together to eliminate structural interference, check safety and operational issues
during the design phase.
These ensure easy maintenance of facilities whilst taking cognizance of any human factors.
This course is designed to provide an understanding of PDMS for 3D Modeling and its application in Oil and Gas facilities. 3D modeling technology will be
introduced using PDMS.
The participant will be trained to appreciate the use of PDMS in developing Structural, Piping, Electrical and Instrumentation components as an introduction
to the necessary skills to optimize PDMS in the detailed Engineering of Oil and Gas facilities
1. In the Design module which is the graphical constructor we will cover the following discipline specific simulation applications.
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors)for civil
And structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
The training will be based on ASME B31.3 &B31.4 CODE.
At the end of the training, a PILOT project on modeling of an liquefied petroleum gas plant (COOKING GAS PLANT) will be carried out by the trainee.1.PLANT/PIPE DESIGN AND STRESS ANALYSIS (PDMS & CAESARII)
PDMS SCOPE
PDMS is the Vantage Plant Design 3D modeling application. It is a definitive 3D design and visualization solution.
It enables plant design personnel of various disciplines work actively together to eliminate structural interference, check safety and operational issues
during the design phase.
These ensure easy maintenance of facilities whilst taking cognizance of any human factors.
This course is designed to provide an understanding of PDMS for 3D Modeling and its application in Oil and Gas facilities. 3D modeling technology will be
introduced using PDMS.
The participant will be trained to appreciate the use of PDMS in developing Structural, Piping, Electrical and Instrumentation components as an introduction
to the necessary skills to optimize PDMS in the detailed Engineering of Oil and Gas facilities
1. In the Design module which is the graphical constructor we will cover the following discipline specific simulation applications.
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors)for civil
And structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
The training will be based on ASME B31.3 &B31.4 CODE.
At the end of the training, a PILOT project on modeling of an liquefied petroleum gas plant (COOKING GAS PLANT) will be carried out by the trainee.FULL PACKAGE AUTOCAD(2D,3D&ISOMETRICS)
COURSE CONTENT-2D DRAFTING & 3D MODELLING
a. AutoCAD general
b. AutoCAD mechanical
c. AutoCAD PID, piping and instrumentation design.
D. AutoCAD structural /architectural.
AUTOCAD 2D DRAFTING
B. AUTOCAD MECHANICAL
1. DESIGN OF BASIC MECHANICAL COMPONENTS.(BOLTS,NUTS,FLANGES,E.T.C
2. INTERPRETATION OF METRIC AND IMPERIAL STANDARDS.AND DESIGN IMPLICATIONS.
3. Machine drawing
C. AUTOCAD PIPING.
1. PIPE DRAFTING AND DESIGN (PIPE ISOMETRICS, DOUBLE AND SINGLE LINE DRAFTING)
2.PIPING AND INSTRUMENTATION DIAGRAMS (P&ID),
4.PROCESS FLOW DIAGRAMS/SHEETS (PFD/PFS)
D.AUTOCAD CIVIL/STRUCTURAL/
1. House plan and elevations
2. BEAMS AND COLUMN DESIGN
3. SLAB DESIGN
AUTOCAD 3D MODELLING,
1. Introduction to 3d fundamentals-BASIC TOOLS(MODELING TOOL,SOLID EDITING,VIEWS,VISUAL STYLES ,3D MODIFY)
2. Modeling of structures (houses, PLATFORMS e.t.c)
3. Modeling of mechanical parts and components i.e mechanical coupling
4. Modeling of piping components (elbows, tees, flange, reducer, valves, e.t.c) FOR 3D PIPING
5. DESIGN OF EQUIPMENTS (, pumps, pressure vessels, heat exchangers, e.tc)
6. Rendering 7. Project and asses
CLASS SIZE: 7 Persons/ Class.
DURATION-each of the programmes takes 1 month
TIMING: 9am - 3pm ,evening 5pm-8pm
Training date is slated as follows:
TRAINING STARTS -14THAPRIL,7TH MAY………2011
.REGISTRATION AND TERMS OF TRAINING CALL +2340864522388
