ETAP(Power System Analysis), Self Training for Fresh and Exp Electrical Engineers

Happy Easter Break..We have been quiet due to our much arrangement and plans on the scheduled programs on ETAP...
You can still get the Learn-it-yourself MANUAL

ETAP is a true 32-bit/64 bit program developed for the Microsoft® Windows® 2003/2008, XP, Vista, and 7 operating systems. It is fully interactive and allows you to make changes to the one-line diagram, run system studies, and graphically review study. It gives you the opportunity to explore the many features and capabilities of ETAP including Load Flow, Short-Circuit, and Underground Raceway Systems analysis.
ETAP is the leading software used by Electrical engineers for modeling of Electrical equipments in power plants, FPSOs, Transmission and Distribution stations to name a few. Being the leading software in the industry, knowledge of ETAP has become a SKILL for Electrical engineers of today. Comprehensive course notes will be provided with practical hands on examples.

PREREQUISITES:

Basic knowledge of Electrical principles, symbols and equipments.
I am willing to give the complete do-it-yourself manual out at a token for those who do not have the means of going for the Training (usually cost N200,000 and above).

In this training manual, you will Learn how to:
♦ Development of Single Line Diagrams, Libraries, Project Data Management, Cable Sizing, Templates
♦ Load Flow Analysis
♦ Short Circuit (IEC and ANSI)
♦ Motor Acceleration
♦ Transient Stability
♦ Protective Device Coordination and Selectivity
♦ Ground Grid Systems
♦ Underground Raceway Systems
♦ ArcFlash Analysis

♦ Other modules based on attendees request and time permitting
OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

ETAP provides one solution to your power system design, analysis, and operation needs. ETAP can be customized to fit your needs, from small to large power systems. This modular approach allows you to purchase only the modules you need. The fully integrated suite of modules in ETAP includes:

Network Analysis
- Arc Flash
- Short Circuit
- Device Coordination & Sequence of Operation
- Load Flow
- Load Analyzer
- Motor Acceleration
- Harmonics
- Transient Stability
- Parameter Estimation
- Panel Systems
- Switching Sequence Management

Cable Systems
- Cable Ampacity & Sizing
- Cable Pulling
- Load Flow
- U/G Duct Banks
- Thermal Analysis

DC Systems
- Load Flow & Short Circuit
- Battery Systems
- Control Systems

Transmission & Distribution
- Transmission Line
- Sag & Tension
- Multi-Phase System
- Unbalanced Load Flow
- Optimal Power Flow
- Capacitor Placement
- Reliability Assessment
- Ground Grid Systems
- Wind Turbine Generator
- GIS Map

Real-Time Solutions
- Monitoring & Trending
- State Estimator
- Event Playback
- Remote Control & Automation
- Energy Accounting
- Real-Time Simulation
- Load Forecasting
- Intelligent Load Shedding
- Automatic Generation Control
- Substation Automation


ETAP provides one solution to your power system design, analysis, and operation needs. ETAP can be customized to fit your needs, from small to large power systems. This modular approach allows you to purchase only the modules you need. The fully integrated suite of modules in ETAP includes:

Network Analysis
- Arc Flash
- Short Circuit
- Device Coordination & Sequence of Operation
- Load Flow
- Load Analyzer
- Motor Acceleration
- Harmonics
- Transient Stability
- Parameter Estimation
- Panel Systems
- Switching Sequence Management

Cable Systems
- Cable Ampacity & Sizing
- Cable Pulling
- Load Flow
- U/G Duct Banks
- Thermal Analysis

DC Systems
- Load Flow & Short Circuit
- Battery Systems
- Control Systems

Transmission & Distribution
- Transmission Line
- Sag & Tension
- Multi-Phase System
- Unbalanced Load Flow
- Optimal Power Flow
- Capacitor Placement
- Reliability Assessment
- Ground Grid Systems
- Wind Turbine Generator
- GIS Map

Real-Time Solutions
- Monitoring & Trending
- State Estimator
- Event Playback
- Remote Control & Automation
- Energy Accounting
- Real-Time Simulation
- Load Forecasting
- Intelligent Load Shedding
- Automatic Generation Control
- Substation Automation

Hurry.....Grab this opportunity and make your voice heard in the Engineering world. Limited offer!

ETAP is a true 32-bit/64 bit program developed for the Microsoft® Windows® 2003/2008, XP, Vista, and 7 operating systems. It is fully interactive and allows you to make changes to the one-line diagram, run system studies, and graphically review study. It gives you the opportunity to explore the many features and capabilities of ETAP including Load Flow, Short-Circuit, and Underground Raceway Systems analysis.
ETAP is the leading software used by Electrical engineers for modeling of Electrical equipments in power plants, FPSOs, Transmission and Distribution stations to name a few. Being the leading software in the industry, knowledge of ETAP has become a SKILL for Electrical engineers of today. Comprehensive course notes will be provided with practical hands on examples.

PREREQUISITES:

Basic knowledge of Electrical principles, symbols and equipments.
I am willing to give the complete do-it-yourself manual out at a token for those who do not have the means of going for the Training (usually cost N200,000 and above).

In this training manual, you will Learn how to:
♦ Development of Single Line Diagrams, Libraries, Project Data Management, Cable Sizing, Templates
♦ Load Flow Analysis
♦ Short Circuit (IEC and ANSI)
♦ Motor Acceleration
♦ Transient Stability
♦ Protective Device Coordination and Selectivity
♦ Ground Grid Systems
♦ Underground Raceway Systems
♦ ArcFlash Analysis

♦ Other modules based on attendees request and time permitting
OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

ETAP provides one solution to your power system design, analysis, and operation needs. ETAP can be customized to fit your needs, from small to large power systems. This modular approach allows you to purchase only the modules you need. The fully integrated suite of modules in ETAP includes:

Network Analysis
- Arc Flash
- Short Circuit
- Device Coordination & Sequence of Operation
- Load Flow
- Load Analyzer
- Motor Acceleration
- Harmonics
- Transient Stability
- Parameter Estimation
- Panel Systems
- Switching Sequence Management

Cable Systems
- Cable Ampacity & Sizing
- Cable Pulling
- Load Flow
- U/G Duct Banks
- Thermal Analysis

DC Systems
- Load Flow & Short Circuit
- Battery Systems
- Control Systems

Transmission & Distribution
- Transmission Line
- Sag & Tension
- Multi-Phase System
- Unbalanced Load Flow
- Optimal Power Flow
- Capacitor Placement
- Reliability Assessment
- Ground Grid Systems
- Wind Turbine Generator
- GIS Map

Real-Time Solutions
- Monitoring & Trending
- State Estimator
- Event Playback
- Remote Control & Automation
- Energy Accounting
- Real-Time Simulation
- Load Forecasting
- Intelligent Load Shedding
- Automatic Generation Control
- Substation Automation


ETAP provides one solution to your power system design, analysis, and operation needs. ETAP can be customized to fit your needs, from small to large power systems. This modular approach allows you to purchase only the modules you need. The fully integrated suite of modules in ETAP includes:

Network Analysis
- Arc Flash
- Short Circuit
- Device Coordination & Sequence of Operation
- Load Flow
- Load Analyzer
- Motor Acceleration
- Harmonics
- Transient Stability
- Parameter Estimation
- Panel Systems
- Switching Sequence Management

Cable Systems
- Cable Ampacity & Sizing
- Cable Pulling
- Load Flow
- U/G Duct Banks
- Thermal Analysis

DC Systems
- Load Flow & Short Circuit
- Battery Systems
- Control Systems

Transmission & Distribution
- Transmission Line
- Sag & Tension
- Multi-Phase System
- Unbalanced Load Flow
- Optimal Power Flow
- Capacitor Placement
- Reliability Assessment
- Ground Grid Systems
- Wind Turbine Generator
- GIS Map

Real-Time Solutions
- Monitoring & Trending
- State Estimator
- Event Playback
- Remote Control & Automation
- Energy Accounting
- Real-Time Simulation
- Load Forecasting
- Intelligent Load Shedding
- Automatic Generation Control
- Substation Automation

OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

Note: we are just giving out the do-it-yourself manual at a token. If you are in Abuja, call us for one-one training.