ETAP(Power System Analysis, Self Training for Fresh and Exp Electrical Engineers

ETAP is a true 32-bit/64 bit program developed for the Microsoft® Windows® 2003/2008, XP, Vista, and 7 operating systems. It is fully interactive and allows you to make changes to the one-line diagram, run system studies, and graphically review study. It gives you the opportunity to explore the many features and capabilities of ETAP including Load Flow, Short-Circuit, and Underground Raceway Systems analysis.
ETAP is the leading software used by Electrical engineers for modeling of Electrical equipments in power plants, FPSOs, Transmission and Distribution stations to name a few. Being the leading software in the industry, knowledge of ETAP has become a SKILL for Electrical engineers of today. Comprehensive course notes will be provided with practical hands on examples.

PREREQUISITES:

Basic knowledge of Electrical principles, symbols and equipments.
I am willing to give the complete do-it-yourself manual out at a token for those who do not have the means of going for the Training (usually cost N200,000 and above).

In this training manual, you will Learn how to:
♦ Development of Single Line Diagrams, Libraries, Project Data Management, Cable Sizing, Templates
♦ Load Flow Analysis
♦ Short Circuit (IEC and ANSI)
♦ Motor Acceleration
♦ Transient Stability
♦ Protective Device Coordination and Selectivity
♦ Ground Grid Systems
♦ Underground Raceway Systems
♦ ArcFlash Analysis

♦ Other modules based on attendees request and time permitting
OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

The step by step training , practises and guidelines are all in the manual. Call for more information.
It is often good to get prepared and uprade oneself ahead of others.

All Employers often request for Experiences...But you can cover up for these experiences by knowing what the professionals in the field pay thousands to get ,by just devoting your time and learning it yourself.

You can learn the program by devoting your lil time and Energy ...Basic knowledge of Electrical principles, symbols and equipments is only required.
Please only serious people should send mails

For more Information, Contact [email protected] or 08109711539 (ope)

All Employers often request for Experiences...But you can cover up for these experiences by knowing what the professionals in the field pay thousands to get ,by just devoting your time and learning it yourself.

You can learn the program by devoting your lil time and Energy ...Basic knowledge of Electrical principles, symbols and equipments is only required.
Please only serious people should send mails

For more Information, Contact [email protected] or 08109711539 (ope)

visit www.Etap.com for more on the Software and it uses

Thanks to all that mailed.
By popular demand, we have decided to include the software and its key for every purchase of the Manual.
See you all on Top as Engineers
Thanks

ETAP is a true 32-bit/64 bit program developed for the Microsoft® Windows® 2003/2008, XP, Vista, and 7 operating systems. It is fully interactive and allows you to make changes to the one-line diagram, run system studies, and graphically review study. It gives you the opportunity to explore the many features and capabilities of ETAP including Load Flow, Short-Circuit, and Underground Raceway Systems analysis.
ETAP is the leading software used by Electrical engineers for modeling of Electrical equipments in power plants, FPSOs, Transmission and Distribution stations to name a few. Being the leading software in the industry, knowledge of ETAP has become a SKILL for Electrical engineers of today. Comprehensive course notes will be provided with practical hands on examples.

PREREQUISITES:

Basic knowledge of Electrical principles, symbols and equipments.
I am willing to give the complete do-it-yourself manual out at a token for those who do not have the means of going for the Training (usually cost N200,000 and above).

In this training manual, you will Learn how to:
♦ Development of Single Line Diagrams, Libraries, Project Data Management, Cable Sizing, Templates
♦ Load Flow Analysis
♦ Short Circuit (IEC and ANSI)
♦ Motor Acceleration
♦ Transient Stability
♦ Protective Device Coordination and Selectivity
♦ Ground Grid Systems
♦ Underground Raceway Systems
♦ ArcFlash Analysis

♦ Other modules based on attendees request and time permitting
OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

All Employers often request for Experiences...But you can cover up for these experiences by knowing what the professionals in the field pay thousands to get ,by just devoting your time and learning it yourself.

You can learn the program by devoting your lil time and Energy ...Basic knowledge of Electrical principles, symbols and equipments is only required.
Please only serious people should send mails

For more Information, Contact [email protected] or 08109711539 (ope)

All Employers often request for Experiences...But you can cover up for these experiences by knowing what the professionals in the field pay thousands to get ,by just devoting your time and learning it yourself.

You can learn the program by devoting your lil time and Energy ...Basic knowledge of Electrical principles, symbols and equipments is only required.
Please only serious people should send mails

For more Information, Contact [email protected] or 08109711539 (ope)

Please indicate your price, so that we can know if it is affordable.

Quote:

---

Originally Posted by king20

Please indicate your price, so that we can know if it is affordable.

---

Mr King, send a mail to us at the below email address or call. Thanks

For those who have purchased the e-manual (and software for easy installation).
Kindly send a mail to us at [email protected] or 08109711539 should you encounter any problem during installations. Even thought, it is a do- it- yourself manual, all neccessary support are still being given to those who need it.
Just equipt yourself to fit in to the modern day rapid development in the power and Energy sector.
Smart Grid is the order of the day and you need all the resources you can lay your hand on.
FYI, This e-manual is limited, we plan to start training of fresh graduates and Experienced Engineers on the use of ETaP soon. That means, the consultation fees goes up.
So hurry and get ur manual + the software now before we close the sales

Cheers
Engineer Opeyemi

ETAP is a true 32-bit/64 bit program developed for the Microsoft® Windows® 2003/2008, XP, Vista, and 7 operating systems. It is fully interactive and allows you to make changes to the one-line diagram, run system studies, and graphically review study. It gives you the opportunity to explore the many features and capabilities of ETAP including Load Flow, Short-Circuit, and Underground Raceway Systems analysis.
ETAP is the leading software used by Electrical engineers for modeling of Electrical equipments in power plants, FPSOs, Transmission and Distribution stations to name a few. Being the leading software in the industry, knowledge of ETAP has become a SKILL for Electrical engineers of today. Comprehensive course notes will be provided with practical hands on examples.

PREREQUISITES:

Basic knowledge of Electrical principles, symbols and equipments.
I am willing to give the complete do-it-yourself manual out at a token for those who do not have the means of going for the Training (usually cost N200,000 and above).

In this training manual, you will Learn how to:
♦ Development of Single Line Diagrams, Libraries, Project Data Management, Cable Sizing, Templates
♦ Load Flow Analysis
♦ Short Circuit (IEC and ANSI)
♦ Motor Acceleration
♦ Transient Stability
♦ Protective Device Coordination and Selectivity
♦ Ground Grid Systems
♦ Underground Raceway Systems
♦ ArcFlash Analysis

♦ Other modules based on attendees request and time permitting
OBJECTIVES
At the end of the course, You should be able to :
♦ Build system single line diagrams using IEC standards and ANSI standards.
♦ Interpret and analyze Electrical study reports such as Load Flow report, Short Circuit report etc.
♦ Size protective devices; understand the principle of electrical protection and Transient Stability.
♦ Read and interpret TCC curves, Understand Arc Flash analysis, and recent IEEE and IEC regulations.

For more Information, Contact [email protected] or 08109711539 (ope)

Please note that the training usually cost N200,000 and above but I am just giving out the do-it yourself manual at a token. Only serious People who wished to develop themselves and increase their chances in their career line should call or mail.

All Employers often request for Experiences...But you can cover up for these experiences by knowing what the professionals in the field pay thousands to get ,by just devoting your time and learning it yourself. You can learn the program by devoting your lil time and Energy ...Basic knowledge of Electrical principles, symbols and equipments is only required. Please only serious people should send mails For more Information, Contact [email protected] or 08109711539 (ope)