Control / Instrumentation and Automation Engineering (Lagos)

INSTRUMENTATION AND CONTROL ENGINEERING TRAINING IN LAGOS

ON 21st to 26th APRIL 2014
TIME: 8am to 6pm Daily

YOU WILL LEARN
Instrumentation and Control
• Defining what to measure, why a parameter measure and how to measure.

• Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

• Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

• Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
• Process systems operations and the key characteristics, and measurement needs, as well as

• Techniques to measure and control.

• Control modes and their applications, communications requirements, and the operator and

• Computer controller interface.

• Interrelationships between process, equipment, instruments and controls.

• Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

• Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

• System-wide considerations including communications, local control, remote control, and

• Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators – detailed operating system demonstration – (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
• Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

• In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

• Introduction to instrument components and piping related components

• Valve types and function (manual and controlled)

• Identifying general process and safety device Symbols

• Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

• Typical oil industry pipe sizes
• Pressure Rating
• What is valve tagging?
• Flow direction symbols
• Understanding Operating and design P, V, T data
Site Visit Activities
• Understanding and capturing requirement from a typical Project Scope prior to site visit
• How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
• Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

• Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

• Generating IC&A and Piping interface drawings
• Generating Level Indicator Hook-up Details
• Generating Flow meter Installation Details
• Generating Pressure Indicator Hook-up details
• Generating Pressure Temperature Indicator Hook-up
• Generating Pressure Level Switch Installation Details
• Generating Pressure LIC/LV Installation Details
• Generating Pressure PC/PCV Installation Details
• Generating Pressure PSH/PSL/PI Installation Details
• Generating Pressure Shutdown Valve Installation Details
• Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
• Understanding the actual meaning of PLC
• Importance of PLC in IC&A design works for oil & gas sector
• Logics as regards to designs for control panels and other related automated cubicles
• Help out in the programming of PLCs and know whatever information required by the manufacturers
• Understand various programming languages of the PLC in line with IEC- 61131-3
• Knowing what input and output devices and other PLC/PAC Equipment
• Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
• Understanding Human-machine interface functions


Generating Instrument lists (IL)
• Definition of Instrument list
• To understand the purpose of having an instrument list
• To effectively read and interpret the Instrument list
• To know the composition of Instrument list

Overview of Instrument unit installation

• To understand the use of installation details in instrumentation
• To understand and extract the materials for construction
• To effectively read and recognize the various valves, tubing and cablings
• Involved in the various installation details
• To understand how to extract material take off or Bill of materials from
• To read and analyze various Installation details



Field Instrumentation
• Understanding instrument unit Location Plan
• To understand the use of location plans or layouts in instrumentation
• To understand and read location plans for detection of equipment on Plans
• Generating instrument Loop diagrams
• To understand the use of Loop Diagrams in instrumentation
• To generate loop Diagrams from the P&IDs
• To effectively read and recognize the various valves, tubing’s and cablings Involved in the Loop Diagrams
• To understand every connections or interrelationships involved in loop Diagrams
• To read and analyze various Loop Diagrams.
• Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
• Understanding the DCS initiatives
• Introduction to DCS
• Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
• Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
• Introduction to Safety Analysis and System Design
• Protection Concepts and Safety Analysis

EXAMINATION and CERTIFICATION

COST: 60,000 (COVERS MATERIALS,TRAINING AND CERTIFICATE)
DATE: 21st APRIL. To 26th APRIL 2014
TIME:8am to 6pm Daily
TEL: 07035816455
BBM: 23268970
EMAIL: [email protected]
www.hightechng.com

scam scam...
u simply have nothing to offer.
High tech from PH dem to Lag.
I have interview you n simply notice you are very empty n a scam.
Doing instrumentation n control with how many days.with all dis jargon u call course outline

@kemoline... My dear I don't know your frustration.. Our business address and contact is there for everybody to come and verify. Why not come in the evening and see for yourself those currently doing the IC&A training. Come to think of it... How come you registered yesterday only to deceive people, that's not the way to go.

@kemolin.. Lastly... Mind the the things you say, otherwise you will be facing legal actions. You can't hide.