Acatech 2015 batch a graduate internship scholarship programme
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her 2015 Batch ‘A’ Graduate Internship Scholarship Programme for Engineers and Geo-sciences on weekdays and weekends. At the end of the training, outstanding participants will undergo ONE month field experience before further consideration for job placement.
Training categories are as follows.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL AUTOMATION
COURSES:
• Pneumatic and Electro-Pneumatic Control
• Industrial Power Electronics
• Instrumentation & Control in Process Plant (INTOOLS)
• Instrument Calibration (HART 475)
• Valves, Actuators and Positioners
• Industrial Motor Control
• Basic Electrical Troubleshooting using schematics
• Basic PLC Programming (Siemens S7, Allen Bradley)
• SCADA / HMI/ DCS
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN ELECTRICAL & INSTRUMENTATION
COURSES:
• Introduction to Nigeria’s Oil and Gas industry
• Instrumentation and control in process plant (INTOOLS SOFTWARE)
• Instrumented Safety System (ISS)
• Instrument Configuration & Calibration / commissioning (field communicator, HART 375 or 475) Control panel associate wiring/mechanical tools.
• Control Valves, Actuators and Positioners (operation & maintenance)
• 2- System Design, configuration, documentation, testing, Installation, commissioning and maintenance of DCS, SIS, SCADA, PLC and HMI. (Siemens S7 200 & 300, Allen Bradley RS Logix)
• Process Control and Automation Concepts, Intrinsic Safety concepts, OPC, Modbus, Profibus & Foundation Fieldbus.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN MECHANICAL AND ELECTRO-MECHANICAL
COURSES:
• Heating Refrigeration and Air Condition (HVAC)
• Pumps and Compressors
• Instrumentation & Control in Process Plant (INTOOLS)
• Piping System/P&ID
• Diesel Engine: Operation and Maintenance
• Valves, Actuators and Positioners
• Gas turbine (Operation, Troubleshooting & Maintenance)
• Pneumatic & Electro- Pneumatic Systems
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN POWER AND UTILITY
COURSES:
• Refrigeration and Air Conditioning
• Pumps and Compressors
• SCADA/HMI/DCS
• Rotating Equipment Reliability Optimization
• Gas Turbine
• Diesel Engine
• Electrical Installations And Systems Troubleshooting & Repairs- Using Schematic Diagram
• Electrical Testing Equipment- Application & Usage
• Electrical Power System {Generation, Distribution and Management}
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL PROCESS CONTROL
COURSES
• Introduction to Oil and Gas Industry
• ASPEN HYSYS
• SCADA/HMI/DCS
• Programmable Logic Controllers (Siemens S7)
• Pipeline Steady Flow Assurance Using (Pro II/ US-40)
• Heat and Material Balances
• Piping System (PIPE SIM)
• Instrumentation and Control in Process Plant (INTOOLS)
• Distributed Control Systems
• Technical Report Writing/Project
PROFESSIONAL CERTIFICATE OF COMPETENCY IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
• Cathodic Protection
• Non- Destructive Testing( NDT)
• Pipe Wrapping
• Sand Blasting
• Pipe coating
• Pipe Pigging
• Safe Operation in Pipe Maintenance and Corrosion Control
• Technical Report Writing
STATIC 3D SEISMIC FOR RESERVOIR SIMULATION.
• Basic introduction to petroleum geology, geophysics, static modeling, introduction to petrel, workflow and petrel interfaces, windows and bars.
• 3d seg-y and well logs las data qc/qa, importation and exportation using petrel and starting up a static model using workflows explained.
• Seismic interpretations, seismic faults and horizon, visualization and colour templates, and plane manipulations.
• Well tops/horizons, visualization, 2d wells, stratigraphic correlations and petrophysical evaluation of wireline logs.
• Surface and volumetric attributes, visualization of interpreted layers and zones and making out models.
• Fault modeling, 2d and 3d seeded auto tracking, automatic fault extraction,
pillar griding, horizons, zonation, layering, visualization of models and rendering of models.
• Surfaces such faults and horizons surfaces. Surface attributes calculations, polygons and z-maps
• Basic volume calculations, up scaling of well logs, properties and statistics.
Case study presentation.
Method of Application: Application forms can be obtained from our office from Mon - Fri within the hours of 9am- 3pm at a cost of N5, 000
OR U can download our application form online, fill and submit at any of our office locations
Close OF Registration: 6TH March, 2015
Scholarship Examination Date: 7TH March, 2015
Follow us on Facebook: https://www.facebook.com/acatechnigerialtd
Lecture Commencement:
Date (Regular): 16 TH March, 2015
Weekends: 14 TH March, 2015
LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd
PORTHARCOURT TRAINING CENTER: 17, Trans-Woji Road by Slaughter, Port-Harcourt
TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun),
WHAT DO WE EXPECT OF YOU
• To participate in the discussion and practical exercises
• Share your experiences
• Listen to others and understand their point of view
• Give constructive feedback/ask questions
• Be punctual and attend regularly.
FOR MORE INFORMATION:
visit our website:www.acatechnigeria.com
Or send us an email: [email protected], [email protected]
Or call (0) 70 667 73567, (0) 80 827 33123
Re: Acatech 2015 batch a graduate internship scholarship programme
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her 2015 Batch ‘A’ Graduate Internship Scholarship Programme for Engineers and Geo-sciences on weekdays and weekends. At the end of the training, outstanding participants will undergo ONE month field experience before further consideration for job placement.
Training categories are as follows.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL AUTOMATION
COURSES:
• Pneumatic and Electro-Pneumatic Control
• Industrial Power Electronics
• Instrumentation & Control in Process Plant (INTOOLS)
• Instrument Calibration (HART 475)
• Valves, Actuators and Positioners
• Industrial Motor Control
• Basic Electrical Troubleshooting using schematics
• Basic PLC Programming (Siemens S7, Allen Bradley)
• SCADA / HMI/ DCS
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN ELECTRICAL & INSTRUMENTATION
COURSES:
• Introduction to Nigeria’s Oil and Gas industry
• Instrumentation and control in process plant (INTOOLS SOFTWARE)
• Instrumented Safety System (ISS)
• Instrument Configuration & Calibration / commissioning (field communicator, HART 375 or 475) Control panel associate wiring/mechanical tools.
• Control Valves, Actuators and Positioners (operation & maintenance)
• 2- System Design, configuration, documentation, testing, Installation, commissioning and maintenance of DCS, SIS, SCADA, PLC and HMI. (Siemens S7 200 & 300, Allen Bradley RS Logix)
• Process Control and Automation Concepts, Intrinsic Safety concepts, OPC, Modbus, Profibus & Foundation Fieldbus.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN MECHANICAL AND ELECTRO-MECHANICAL
COURSES:
• Heating Refrigeration and Air Condition (HVAC)
• Pumps and Compressors
• Instrumentation & Control in Process Plant (INTOOLS)
• Piping System/P&ID
• Diesel Engine: Operation and Maintenance
• Valves, Actuators and Positioners
• Gas turbine (Operation, Troubleshooting & Maintenance)
• Pneumatic & Electro- Pneumatic Systems
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN POWER AND UTILITY
COURSES:
• Refrigeration and Air Conditioning
• Pumps and Compressors
• SCADA/HMI/DCS
• Rotating Equipment Reliability Optimization
• Gas Turbine
• Diesel Engine
• Electrical Installations And Systems Troubleshooting & Repairs- Using Schematic Diagram
• Electrical Testing Equipment- Application & Usage
• Electrical Power System {Generation, Distribution and Management}
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL PROCESS CONTROL
COURSES
• Introduction to Oil and Gas Industry
• ASPEN HYSYS
• SCADA/HMI/DCS
• Programmable Logic Controllers (Siemens S7)
• Pipeline Steady Flow Assurance Using (Pro II/ US-40)
• Heat and Material Balances
• Piping System (PIPE SIM)
• Instrumentation and Control in Process Plant (INTOOLS)
• Distributed Control Systems
• Technical Report Writing/Project
PROFESSIONAL CERTIFICATE OF COMPETENCY IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
• Cathodic Protection
• Non- Destructive Testing( NDT)
• Pipe Wrapping
• Sand Blasting
• Pipe coating
• Pipe Pigging
• Safe Operation in Pipe Maintenance and Corrosion Control
• Technical Report Writing
STATIC 3D SEISMIC FOR RESERVOIR SIMULATION.
• Basic introduction to petroleum geology, geophysics, static modeling, introduction to petrel, workflow and petrel interfaces, windows and bars.
• 3d seg-y and well logs las data qc/qa, importation and exportation using petrel and starting up a static model using workflows explained.
• Seismic interpretations, seismic faults and horizon, visualization and colour templates, and plane manipulations.
• Well tops/horizons, visualization, 2d wells, stratigraphic correlations and petrophysical evaluation of wireline logs.
• Surface and volumetric attributes, visualization of interpreted layers and zones and making out models.
• Fault modeling, 2d and 3d seeded auto tracking, automatic fault extraction,
pillar griding, horizons, zonation, layering, visualization of models and rendering of models.
• Surfaces such faults and horizons surfaces. Surface attributes calculations, polygons and z-maps
• Basic volume calculations, up scaling of well logs, properties and statistics.
Case study presentation.
Method of Application: Application forms can be obtained from our office from Mon - Fri within the hours of 9am- 3pm at a cost of N5, 000
OR U can download our application form online, fill and submit at any of our office locations
Close OF Registration: 6TH March, 2015
Scholarship Examination Date: 7TH March, 2015
Follow us on Facebook: https://www.facebook.com/acatechnigerialtd
Lecture Commencement:
Date (Regular): 16 TH March, 2015
Weekends: 14 TH March, 2015
LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd
PORTHARCOURT TRAINING CENTER: 17, Trans-Woji Road by Slaughter, Port-Harcourt
TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun),
WHAT DO WE EXPECT OF YOU
• To participate in the discussion and practical exercises
• Share your experiences
• Listen to others and understand their point of view
• Give constructive feedback/ask questions
• Be punctual and attend regularly.
FOR MORE INFORMATION:
visit our website:www.acatechnigeria.com
Or send us an email: [email protected], [email protected]
Or call (0) 70 667 73567, (0) 80 827 33123
Re: Acatech 2015 batch a graduate internship scholarship programme
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her 2015 Batch ‘A’ Graduate Internship Scholarship Programme for Engineers and Geo-sciences on weekdays and weekends. At the end of the training, outstanding participants will undergo ONE month field experience before further consideration for job placement.
Training categories are as follows.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL AUTOMATION
COURSES:
• Pneumatic and Electro-Pneumatic Control
• Industrial Power Electronics
• Instrumentation & Control in Process Plant (INTOOLS)
• Instrument Calibration (HART 475)
• Valves, Actuators and Positioners
• Industrial Motor Control
• Basic Electrical Troubleshooting using schematics
• Basic PLC Programming (Siemens S7, Allen Bradley)
• SCADA / HMI/ DCS
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN ELECTRICAL & INSTRUMENTATION
COURSES:
• Introduction to Nigeria’s Oil and Gas industry
• Instrumentation and control in process plant (INTOOLS SOFTWARE)
• Instrumented Safety System (ISS)
• Instrument Configuration & Calibration / commissioning (field communicator, HART 375 or 475) Control panel associate wiring/mechanical tools.
• Control Valves, Actuators and Positioners (operation & maintenance)
• 2- System Design, configuration, documentation, testing, Installation, commissioning and maintenance of DCS, SIS, SCADA, PLC and HMI. (Siemens S7 200 & 300, Allen Bradley RS Logix)
• Process Control and Automation Concepts, Intrinsic Safety concepts, OPC, Modbus, Profibus & Foundation Fieldbus.
PROFESSIONAL CERTIFICATE OF COMPETENCY IN MECHANICAL AND ELECTRO-MECHANICAL
COURSES:
• Heating Refrigeration and Air Condition (HVAC)
• Pumps and Compressors
• Instrumentation & Control in Process Plant (INTOOLS)
• Piping System/P&ID
• Diesel Engine: Operation and Maintenance
• Valves, Actuators and Positioners
• Gas turbine (Operation, Troubleshooting & Maintenance)
• Pneumatic & Electro- Pneumatic Systems
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN POWER AND UTILITY
COURSES:
• Refrigeration and Air Conditioning
• Pumps and Compressors
• SCADA/HMI/DCS
• Rotating Equipment Reliability Optimization
• Gas Turbine
• Diesel Engine
• Electrical Installations And Systems Troubleshooting & Repairs- Using Schematic Diagram
• Electrical Testing Equipment- Application & Usage
• Electrical Power System {Generation, Distribution and Management}
• Technical Report Writing
PROFESSIONAL CERTIFICATE OF COMPETENCY IN INDUSTRIAL PROCESS CONTROL
COURSES
• Introduction to Oil and Gas Industry
• ASPEN HYSYS
• SCADA/HMI/DCS
• Programmable Logic Controllers (Siemens S7)
• Pipeline Steady Flow Assurance Using (Pro II/ US-40)
• Heat and Material Balances
• Piping System (PIPE SIM)
• Instrumentation and Control in Process Plant (INTOOLS)
• Distributed Control Systems
• Technical Report Writing/Project
PROFESSIONAL CERTIFICATE OF COMPETENCY IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
• Cathodic Protection
• Non- Destructive Testing( NDT)
• Pipe Wrapping
• Sand Blasting
• Pipe coating
• Pipe Pigging
• Safe Operation in Pipe Maintenance and Corrosion Control
• Technical Report Writing
STATIC 3D SEISMIC FOR RESERVOIR SIMULATION.
• Basic introduction to petroleum geology, geophysics, static modeling, introduction to petrel, workflow and petrel interfaces, windows and bars.
• 3d seg-y and well logs las data qc/qa, importation and exportation using petrel and starting up a static model using workflows explained.
• Seismic interpretations, seismic faults and horizon, visualization and colour templates, and plane manipulations.
• Well tops/horizons, visualization, 2d wells, stratigraphic correlations and petrophysical evaluation of wireline logs.
• Surface and volumetric attributes, visualization of interpreted layers and zones and making out models.
• Fault modeling, 2d and 3d seeded auto tracking, automatic fault extraction,
pillar griding, horizons, zonation, layering, visualization of models and rendering of models.
• Surfaces such faults and horizons surfaces. Surface attributes calculations, polygons and z-maps
• Basic volume calculations, up scaling of well logs, properties and statistics.
Case study presentation.
Method of Application: Application forms can be obtained from our office from Mon - Fri within the hours of 9am- 3pm at a cost of N5, 000
OR U can download our application form online, fill and submit at any of our office locations
Close OF Registration: 6TH March, 2015
Scholarship Examination Date: 7TH March, 2015
Follow us on Facebook: https://www.facebook.com/acatechnigerialtd
Lecture Commencement:
Date (Regular): 16 TH March, 2015
Weekends: 14 TH March, 2015
LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd
PORTHARCOURT TRAINING CENTER: 17, Trans-Woji Road by Slaughter, Port-Harcourt
TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun),
WHAT DO WE EXPECT OF YOU
• To participate in the discussion and practical exercises
• Share your experiences
• Listen to others and understand their point of view
• Give constructive feedback/ask questions
• Be punctual and attend regularly.
FOR MORE INFORMATION:
visit our website:www.acatechnigeria.com
Or send us an email: [email protected], [email protected]
Or call (0) 70 667 73567, (0) 80 827 33123
