Acatech 2014 batch c certificate scholarship programme in portharcourt(engineers)

Printable View

Sep 13th, 14, 08:51 am
acatechconsulting

Acatech 2014 batch c certificate scholarship programme in portharcourt(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch C Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Rivers State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- SUPERVISORY CONTROL AND DATA ACQUSITION SYSTEMS (SCADA) & HMI
- DISTRIBUTED CONTROL SYSTEMS (DCS)
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- PIPING SYSTEM/P&ID
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- GAS TURBINE (OPERATION, TROUBLESHOOTING & MAINTENANCE)
- PNEUMATIC & ELECTRO- PNEUMATIC SYSTEMS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
- TECHNICAL REPORT WRITING
CERTIFICATE IN PROCESS CONTROL ENGINEERING
COURSES
- INTRODUCTION TO OIL AND GAS INDUSTRY
- RESERVOIR SIMULATION USING (PRO II AND FLARE SIM SOFTWARE)
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- PIPELINE STEADY FLOW ASSURANCE USING (PRO II/ US-40)
- HEAT AND MATERIAL BALANCES
- PIPING SYSTEM (PFDs, PIDs, ESD)
- INSTRUMENTATION AND CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- DISTRIBUTED CONTROL SYSTEMS
- TECHNICAL REPORT WRITING
CERTIFICATE IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
- CATHODIC PROTECTION
- NON- DESTRUCTIVE TESTING( NDT)
- PIPE WRAPPING
- SAND BLASTING
- SPARAY PAINTING
- PIPE PIGGING
- SAFE OPERATION IN PIPE MAINTENANCE AND CORROSION CONTROL
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
Method of Application: Application forms can be obtained from our office from mon - fri within the hours of 9am- 3pm
follow us on Face book : https://www.facebook.com/acatechnigerialtd

DATE (REGULAR): Group 1, (25^TH AUG-13^TH SEPT), Group 2, (15^TH SEPT- 3^RDOCT), Group 3, (6^th OCT– 20^th OCT)
WEEKENDS: (30^TH AUG- 19^TH OCT)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun), special arrangement for evening classes can be considered.

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123
Sep 16th, 14, 06:57 am
acatechconsulting

Re: Acatech 2014 batch c certificate scholarship programme in portharcourt(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Rivers State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- SUPERVISORY CONTROL AND DATA ACQUSITION SYSTEMS (SCADA) & HMI
- DISTRIBUTED CONTROL SYSTEMS (DCS)
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- PIPING SYSTEM/P&ID
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- GAS TURBINE (OPERATION, TROUBLESHOOTING & MAINTENANCE)
- PNEUMATIC & ELECTRO- PNEUMATIC SYSTEMS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
- TECHNICAL REPORT WRITING
CERTIFICATE IN PROCESS CONTROL ENGINEERING
COURSES
- INTRODUCTION TO OIL AND GAS INDUSTRY
- RESERVOIR SIMULATION USING (PRO II AND FLARE SIM SOFTWARE)
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- PIPELINE STEADY FLOW ASSURANCE USING (PRO II/ US-40)
- HEAT AND MATERIAL BALANCES
- PIPING SYSTEM (PFDs, PIDs, ESD)
- INSTRUMENTATION AND CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- DISTRIBUTED CONTROL SYSTEMS
- TECHNICAL REPORT WRITING
CERTIFICATE IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
- CATHODIC PROTECTION
- NON- DESTRUCTIVE TESTING( NDT)
- PIPE WRAPPING
- SAND BLASTING
- SPARAY PAINTING
- PIPE PIGGING
- SAFE OPERATION IN PIPE MAINTENANCE AND CORROSION CONTROL
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
Method of Application: Application forms can be obtained from our office from mon - fri within the hours of 9am- 3pm
follow us on Face book : https://www.facebook.com/acatechnigerialtd

DATE (REGULAR): Group 1, (25^TH AUG-13^TH SEPT), Group 2, (15^TH SEPT- 3^RDOCT), Group 3, (6^th OCT– 20^th OCT)
WEEKENDS: (30^TH AUG- 19^TH OCT)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun), special arrangement for evening classes can be considered.

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123
Sep 17th, 14, 04:43 pm
acatechconsulting

Re: Acatech 2014 batch c certificate scholarship programme in portharcourt(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch C Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Rivers State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- SUPERVISORY CONTROL AND DATA ACQUSITION SYSTEMS (SCADA) & HMI
- DISTRIBUTED CONTROL SYSTEMS (DCS)
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- PIPING SYSTEM/P&ID
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- GAS TURBINE (OPERATION, TROUBLESHOOTING & MAINTENANCE)
- PNEUMATIC & ELECTRO- PNEUMATIC SYSTEMS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
- TECHNICAL REPORT WRITING
CERTIFICATE IN PROCESS CONTROL ENGINEERING
COURSES
- INTRODUCTION TO OIL AND GAS INDUSTRY
- RESERVOIR SIMULATION USING (PRO II AND FLARE SIM SOFTWARE)
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- PIPELINE STEADY FLOW ASSURANCE USING (PRO II/ US-40)
- HEAT AND MATERIAL BALANCES
- PIPING SYSTEM (PFDs, PIDs, ESD)
- INSTRUMENTATION AND CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- DISTRIBUTED CONTROL SYSTEMS
- TECHNICAL REPORT WRITING
CERTIFICATE IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
- CATHODIC PROTECTION
- NON- DESTRUCTIVE TESTING( NDT)
- PIPE WRAPPING
- SAND BLASTING
- SPARAY PAINTING
- PIPE PIGGING
- SAFE OPERATION IN PIPE MAINTENANCE AND CORROSION CONTROL
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
Method of Application: Application forms can be obtained from our office from mon - fri within the hours of 9am- 3pm
follow us on Face book : https://www.facebook.com/acatechnigerialtd

DATE (REGULAR): Group 1, (25^TH AUG-13^TH SEPT), Group 2, (15^TH SEPT- 3^RDOCT), Group 3, (6^th OCT– 20^th OCT)
WEEKENDS: (30^TH AUG- 19^TH OCT)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun), special arrangement for evening classes can be considered.

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123
Sep 18th, 14, 11:48 am
acatechconsulting

Re: Acatech 2014 batch c certificate scholarship programme in portharcourt(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch C Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Rivers State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- SUPERVISORY CONTROL AND DATA ACQUSITION SYSTEMS (SCADA) & HMI
- DISTRIBUTED CONTROL SYSTEMS (DCS)
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- PIPING SYSTEM/P&ID
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- GAS TURBINE (OPERATION, TROUBLESHOOTING & MAINTENANCE)
- PNEUMATIC & ELECTRO- PNEUMATIC SYSTEMS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
- TECHNICAL REPORT WRITING
CERTIFICATE IN PROCESS CONTROL ENGINEERING
COURSES
- INTRODUCTION TO OIL AND GAS INDUSTRY
- RESERVOIR SIMULATION USING (PRO II AND FLARE SIM SOFTWARE)
- PLC/SCADA
- HUMAN MACHINE INTERFACE (HMI)
- PIPELINE STEADY FLOW ASSURANCE USING (PRO II/ US-40)
- HEAT AND MATERIAL BALANCES
- PIPING SYSTEM (PFDs, PIDs, ESD)
- INSTRUMENTATION AND CONTROL IN PROCESS PLANT
- INSTRUMENT CALIBRATION
- DISTRIBUTED CONTROL SYSTEMS
- TECHNICAL REPORT WRITING
CERTIFICATE IN PIPE MAINTENANCE & CORROSION CONTROL
COURSES:
- CATHODIC PROTECTION
- NON- DESTRUCTIVE TESTING( NDT)
- PIPE WRAPPING
- SAND BLASTING
- SPARAY PAINTING
- PIPE PIGGING
- SAFE OPERATION IN PIPE MAINTENANCE AND CORROSION CONTROL
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
Method of Application: Application forms can be obtained from our office from mon - fri within the hours of 9am- 3pm
follow us on Face book : https://www.facebook.com/acatechnigerialtd

DATE (REGULAR): Group 1, (25^TH AUG-13^TH SEPT), Group 2, (15^TH SEPT- 3^RDOCT), Group 3, (6^th OCT– 20^th OCT)
WEEKENDS: (30^TH AUG- 19^TH OCT)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun), special arrangement for evening classes can be considered.

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123