Acatech 2014 batch b certificate scholarship programme in lagos(engineers)

Printable View

Show 40 post(s) from this thread on one page

Jun 17th, 14, 12:01 pm
acatechconsulting

Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^TH AUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 18th, 14, 09:17 am
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 18th, 14, 02:17 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 19th, 14, 12:28 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 20th, 14, 08:45 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 22nd, 14, 10:35 am
budymore

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)

How much does the training cost?
Jun 24th, 14, 12:57 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 25th, 14, 09:40 am
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 26th, 14, 03:24 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 27th, 14, 02:11 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 28th, 14, 06:23 am
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES
Jun 30th, 14, 09:18 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)

ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows. CERTIFICATE IN AUTOMATION ENGINEERING COURSES: PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL INSTRUMENTATION & CONTROL IN PROCESS PLANT INDUSTRIAL MOTOR CONTROL / VSD APPLICATION BASIC ELECTRICAL TROUBLESHOOTING BASIC PLC PROGRAMMING BASIC HEALTH SAFETY AND ENVIRONMENT TECHNICAL REPORT WRITING CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING COURSES: HEATING REFRIGERATION AND AIR CONDITION (HVAC) PUMPS AND COMPRESSORS PIPING SYSTEM DIESEL ENGINE: OPERATION AND MAINTENANCE VALVES AND ACTUATORS BASIC HEALTH SAFETY AND ENVIRONMENT TECHNICAL REPORT WRITING CERTIFICATE IN POWER AND UTILITY COURSES: REFRIGERATION AND AIR CONDITION PUMPS AND COMPRESSORS GAS TURBINE DIESEL ENGINE BASIC ELECTRICAL TROUBLESHOOTING BASIC HEALTH SAFETY AND ENVIRONMENT ELECTRICAL POWER SYSTEM {Generation, distribution and management} use the link below to apply http://www.acatechnigeria.com/apply.html DATE (REGULAR): Group 1 (30TH JUNE-11TH JULY), Group 2, (14TH JULY-25TH JULY), Group 3, (28TH JULY 8TH AUGUST) WEEKENDS: (5TH JULY- 10TH AUG) LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos. PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun) WHAT DO WE EXPECT OF YOU To participate in the discussion and practical exercises Share your experiences Listen to others and understand their point of view Give constructive feedback/ask questions Be punctual and attend regularly. PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS. FOR MORE INFORMATION: visit our website:www.acatechnigeria.com Or send us an email: [email protected] Or call (0) 70 667 73567, (0) 80 827 33123 WHO WE ARE: Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector. As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe. Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training. ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES Industrial Motor Controls: Operation, Troubleshooting And Maintenance Industrial Power Electronics Diesel Engines: Operation And Maintenance Basic Electrical Troublshooting & Repairs- Using Schematic Diagram Electrical Power Systems ( Generation, Distribution And Management) Safe Use Of Lifting Equipment Power System Protection And Safety Earth Moving/Heavy Equipments Electrical Systems Troubleshooting (Using Et Software) Automobile Troubleshooting Using Auto Diagnostic Tool (Car Scanner) Slings And Wires( Design, Maintenance And Certification) Rig Pass Instrumentation And Control In Process Plant Instrument Calibration Basic Plc-Programming, Troubleshooting & Maintenance (Siemens S7) Supervisory Control And Data Acquisition (Scada) & Hmi Gas Turbines: Operation, Troubleshooting & Mainteanace Advanced Plc Programming , Troubleshooting & Maintenance (Siemens S7) Heating, Ventillation And Air Conditioning(Hvac) - Operation, Troubleshooting & Maintenance Valves And Actuators Piping System Pumps And Compressors: Operation, Troubleshooting & Maintenance Refrigeration And Air Condition Marine Gears: Engine And Gear Box Electrical Installation In Vessels: Operation, Troubleshooting & Maintenance Pneumatic & Electro-Pneumatics Automation Sys. Operation And Troubleshooting Security Surveillance Systems And Management: Installation & Maintenance: Cctv Cameras , Intruder Alarms, Access Controls, Emergency Evacuation And Transponders Solar Power Systems: Design, Installation & Maintenance (Inverters, Borehole & Street Lightin
Jul 3rd, 14, 04:32 pm
acatechconsulting

Re: Acatech 2014 batch b certificate scholarship programme in lagos(engineers)
ADVANCED CENTER FOR APPLIED TECHNOLOGY & CONSULTING LTD holds her Batch B Certificate Scholarship Programme on weekdays and weekends. This training is strictly for technicians and engineers and other applied science related courses who reside in Lagos State. Training categories are as follows.

CERTIFICATE IN AUTOMATION ENGINEERING
COURSES:
- PNEUMATIC AND ELECTRO-PNEUMATIC CONTROL
- INSTRUMENTATION & CONTROL IN PROCESS PLANT
- INDUSTRIAL MOTOR CONTROL / VSD APPLICATION
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC PLC PROGRAMMING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN MECHANICAL AND ELECTRO-MECHANICAL ENGINEERING
COURSES:
- HEATING REFRIGERATION AND AIR CONDITION (HVAC)
- PUMPS AND COMPRESSORS
- PIPING SYSTEM
- DIESEL ENGINE: OPERATION AND MAINTENANCE
- VALVES AND ACTUATORS
- BASIC HEALTH SAFETY AND ENVIRONMENT
- TECHNICAL REPORT WRITING
CERTIFICATE IN POWER AND UTILITY
COURSES:
- REFRIGERATION AND AIR CONDITION
- PUMPS AND COMPRESSORS
- GAS TURBINE
- DIESEL ENGINE
- BASIC ELECTRICAL TROUBLESHOOTING
- BASIC HEALTH SAFETY AND ENVIRONMENT
- ELECTRICAL POWER SYSTEM {Generation, distribution and management}
use the link below to apply
http://www.acatechnigeria.com/apply.html

DATE (REGULAR): Group 1 (30^TH JUNE-11^TH JULY), Group 2, (14^TH JULY-25TH JULY), Group 3, (28^TH JULY 8^THAUGUST)
WEEKENDS: (5TH JULY- 10^TH AUG)

LECTURE VENUE: Advanced Center For Applied Technology And Consulting Ltd

LAGOS TRAINING CENTER: 109 Lagos Abeokuta Expressway (By Starling Bank Building) Adealu Bus Stop, Iyana Ipaja Lagos.

PORTHARCOURT TRAINING CENTER: 143b Aba Road, By Obinuchi Close Behind Standard Chartered Bank Plc, Port-Harcourt

TIME SCHEDULE: 9am – 5pm Weekdays (Mon-Fri) And Weekends (Sat & Sun)

WHAT DO WE EXPECT OF YOU
- To participate in the discussion and practical exercises
- Share your experiences
- Listen to others and understand their point of view
- Give constructive feedback/ask questions
- Be punctual and attend regularly.
PLEASE NOTE: PARTICIPANTS WILL ONLY BE RESPONSIBLE FOR THEIR COURSE MATERIALS.

FOR MORE INFORMATION:

visit our website:www.acatechnigeria.com
Or send us an email: info@acatechnigeria.com
Or call (0) 70 667 73567, (0) 80 827 33123

WHO WE ARE:
Advanced center for applied technology & consulting ltd is an indigenous training and consulting service provider involved in training personnel’s in manufacturing, oil & gas, and marine sector.
As demand for highly skilled employees in these industries grows, we have succeeded in carving a highly technical training curriculum with hands on practical and real time training exercises. We are also the first in Nigeria to expand its training courses to include marine, heavy duty and earthmoving equipment skills needed in most project site across the globe.
Our instructors have years of industrial experience and international exposure in the core engineering fields. Our courses are held in five major cities in Nigeria and we can also deliver customized training in your facility under our in-plant training.

ACATECH & CONSULTING LTD ALSO OFFERS THE FOLLOWING SHORT COURSES

Show 40 post(s) from this thread on one page

All times are GMT +1. The time now is 11:39 pm.

Copyright © 2014 Naijahotjobs.com