CFD Training

For critical thinking engineers only, this is 99% practical based oriented training tactic. It is more of research work, 25% (facilitators/trainers/participants) class work, 50% (participants) projects effort/researches work, 25% facilitators’ assistant on participants’ projects tasks. Facilitators/trainers will be on ground to support the participants in achieving the objectives of training projects tasks.
Participants are expected to acquaint themselves with the designated terms depending on their domain(s) of interest:
Numerical analysis, optimization, thermodynamics, transport phenomenon, chemical kinetics, heat transfer, fluid mechanics, aerodynamics, combustions, multiphase, 3D modeling, programming language (C++), MatLab e.t.c.


Coarse Goals:
Participants will learn how to solve the Navier-Stokes and others equations for engineering problems using both customized codes and a commercial code where necessary.

Module I: Fundamental of Fluid Dynamic


  • Introduction to CFD
  • Introduction to fluid dynamics


  • Concept of continuum, streamline, and pathlines
  • Pressure distribution in fluid
  • Reynolds transport theorem
  • Viscous and inviscid flows
  • Laminar and Turbulent flows
  • External and internal flows
  • Compressible and incompressible flow
  • Properties of Supersonic and Subsonic flows


  • Introduction to flow analysis
  • Steady and transient solution
  • Introduction to Numerical methods
  • Numerical methods in CFD
  • Finite discrete method, finite element method, finite volume method
  • Governing (including derivation from the first principle) equations of fluid
  • Navier Stoke equations and others
  • Major current players

- Ansys (Fluent and other codes)!
- adapco: (starCD)
- OpenFoam
e.t.c

  • Class works


Module II: CFD Analysis

Techniques (CFD)

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Geometry

Choice of geometry, 2D or 3D consideration

Geometry Operation:

Introduction to design modeler, sketching, body transformation, blend and chamfer, sweep, extrude, Boolean operation, pattern array, edge split, imprint, projection, slice, freeze and unfreeze e.tc


Participants are expected to model 2D/3D of the following domain or otherwise:

2D/3D - Asymmetric diffuser, simple pipe, Airfoil, Ahmend body, vessel, Radiant warmer, Aircraft design, Automobile, Gear, Reactors, or any other domains consider appropriate for the training e.t.c

Geometry Projects:

Selected geometry projects across various disciplines to test the participants’ knowledge of the understanding of modeling a true domain.




Meshing/Grid

Mesh Operation: Body of influence, fine mesh, hexahedral mesh, mapped match control, sizing, refinement, multi zone, section plane, sphere of influence, meshing inflation e.t.c

-Introduction to discretization of domain
-Types of mesh/grid
-Mesh Generation Techniques
1. Repairing a Boundary?
2. Tetrahedral Mesh Generation
3. Zonal Hybrid Mesh
4. Viscous Hybrid Mesh Generation
4. Hexcore Mesh Generation
5. Generating the Hexcore Mesh to Domain
6. Using the Boundary Wrapper
7.CutCell Mesh Generation
8. Object Based Mesh
9. Cavity Remeshing
· Specifying meshing type (free or mapped)
· Meshing solid model entities
· Clearing meshes
· Refining meshes
·
Meshing Projects:
Selected 2D/3D models across various disciplines to test the participants’ knowledge of the understanding of discretization of a true domain.

Module III – Advance CFD -Setup (Physics), Solution, Results, Verification and validation.

What kind of problem set will prompt me to choose any of the solution method or combination?
What kind of problem set will prompt me to choose any of the Result or combination?

Defining the Solver type, Velocity formulation, steady or transient

Defining the models of domain where appropriates:
-Multiphase, -Energy, -viscous or turbulent, -Radiation, -Heat Exchanger, -Species
-Discrete phase, -Solidification & melting, -Acoustics

Defining the materials for domains and the zone type



Defining the boundary Conditions and the solutions methods


Defining and setting up the solution methods and schemes

Calculation activities and running calculation

Setting the post processing and reporting results of interest

Using Animation to visualizes and captures reports of interest.

Projects:
Mastering of solutions setup for relevant domains will be the major tasks under the based projects for the participants.

Module IV – Introduction to user define functions (UDF)

Introduction to CFD Programming
Introduction to C++ Programming
Case study: implementation of UDF to a typical domain

.
Module V - Based projects

Domain A. Combustions Simulation

Introduction to various terminologies in Combustions
Combustions formulation problems
Case study project based on Combustions

Domain B. Multiphase Simulation
Introduction to various terminologies in Multiphase
Multiphase formulation problems
Case study project based on Multiphase

Domain C. Turbo machinery
Introduction to turbo machinery terminology
Quasi-Steady Rotor-Stator Interaction
CFD study of rotor-stator interactions
CFD simulation of turbo machinery components

Domain D. Aerospace Simulation

Introduction to various terminologies in aerodynamics
Computations of 2D aerofoil
Flow simulation on aerofoil at various angles of attack
Supersonic and subsonic flow simulations
Lift, drag prediction on an aero plane, rockets and missiles
Project based on air-craft systems (wing, fuselage etc.)

Domain E. Automobile Simulation
Introduction to various terminologies in automobile simulations
CFD analysis on Ahmed body
Transient and steady state analysis
Project based on automotive systems (Under hood thermal analysis, External flow, Passenger comfort analysis)

Domain F. A fluid structural interaction (FSI) Simulation

Introduction to various terminologies in fluid structural interaction (FSI)
Formulation problems on FSI
Project based on fluid structural interaction (FSI) systems

NOTE:


Not all of the above mentioned domains will be considered, participants must clearly mention their choice of Domains in Module V – Based projects. Eligibility:
Engineers/Scientists undergraduates/Graduates/postgraduates in any of the following disciplines: Mechanical, Civil, Automobile, Aeronautical, Marine, Thermal, Chemical, computer, Electrical etc
Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.
Duration:
Classes will be conducted from Monday to Friday on an average of minimum of 3 times in a week for weekdays Track and Saturday/Sunday for Weekend Track. Starting Date: NegotiableTime/Duration: 6 hours/day, 3 times in a week, Minimum of 144 hours

Course, time and duration can be customize to suite the time frame of the participants Cost: Call us to discuss the current fees for the course.


NB: Fees and conditions of services are subject to change without prior notice
Highlights of our courses:
· 99% practical -oriented training
· Real live-projects based training
Registration and payment: There are limited numbers of places in each course, so early indication of interest is very important. Payment is required for confirmation of place. Participants are expected to registerin advance, say minimum of week before the commencement of the training. Payment should be made to our bank account: To be provided on request.


Class size: The training is design to accommodate few participants only

Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

Training Venue

1. For in-house training, VOGW concept Ltd designate the venue

2. For Outstation training, our client will designate the venue

3. For executive training, our client will designate the venue


VOGW Concept LTDAddress: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, NigeriaEmail: [email protected], [email protected],

Website: www.vogwconcept.com, Tel: +234 - 813 3476 558, +234 - 8055623360