+ Reply + New Job/Topic
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 14 to 26 of 62

Topic: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

  1. #14
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  2. #15
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  3. #16
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  4. #17
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  5. #18
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  6. #19
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  7. #20
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  8. #21
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  9. #22
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  10. #23
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  11. #24
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  12. #25
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

  13. #26
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: PLC, SCADA and VFD (Automation) Practical Training in Ikeja Lagos

    PLC, SCADA and VFD (Automation) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Tel: +234 - 813 3476 558, +234 - 708 574 0887


    99% Practical Oriented Training

    PLC, SCADA, VFD and Pneumatics and Field Instruments (P &FI) for Operators Training.

    YOUTUBE VIDEO: http://lnkd.in/d2vPtGj

    The setup includes PLC, SCADA, VFD and Field Instruments (P &FI). This will shape operators competency and help brings optimum performance during plant operations. Design of Process Automation for Operators Training is a key component that will help to train new employees, update the skills of existing engineers, and to institutionalize and retain the knowledge of experienced operators.

    Programmable Logic Controllers (PLC)

    Plcs Training Course contents

    >> Introduction to PLC
    >> Introduction to Block diagram, PFD and P& ID
    >> Architectural Evolution of PLC
    >> Introduction to the field devices attached to PLC
    >> PLC Fundamentals - (Block diagram of PLC's)
    >> Role of PLC in automation
    >> Detail information about PLC components
    * Power supply * CPU
    * I/O modules * Communication bus

    >> Various ranges available in PLCs
    >> Types of Inputs & outputs
    >> Source Sink Concept in PLC
    >> Concept of flags
    >> Scan cycle execution
    >> PLC Panel wiring
    Practical Exposure to PLC programming to Allen Bradley, Siemens, Mitsubishi, Omron PLCs e.t.c

    >> Introduction to PLC programming software
    >> Addressing concepts
    >> Introduction to bit, byte & word concept
    >> Programming instructions arithmetic and logical
    * Load /and /or/out / and Read / Write * MOVE block
    application
    * Compare / Add / Sub /And /Or - Blocks * Advanced instructions
    * Leading edge / trailing edge instructions * File handling
    * Timer Blocks programming * Comment functions
    * Master control /set /reset function * Counter Block
    programming

    >> Upload, download, Monitoring of programs
    >> Forcing I/P & O/P
    >> Monitoring / Modifying data table values
    >> PLC and Panel wiring
    >> Hands on experience on writing programs

    * Case studies for conveyer, motors control, timer & counter applications etc.
    >> Troubleshooting and fault diagnostics of PLC
    >> Documenting the project
    >> Program assignments for real time applications

    * Special: P & ID design
    * Profibus configuration

    Practical work and industrial projects


    SCADA - Supervisory Control & Data Acquisition

    SCADA Training Course contents

    >> Applications of SCADA software
    >> Different packages available with I/O structure
    >> Features of SCADA software

    Application development in Wonderware InTouch/ Siemens WinCC

    >>Creating a new SCADA application
    >> Creating Database of Tags
    >> Creating & Editing graphic display with animation
    * Data Entry / Start Stop command * Analog entry
    * Sizing * Movement
    * Blinking * Visibility
    * Filling

    >>Trending
    * Creating & Accessing Real-time Trends
    * Creating & Accessing Historical Trends

    >> Creating Alarms & Events
    >> Writing logic through script
    * Application script * Condition
    * Data Change * Window script
    * Special functions

    >> Connectivity with the different hardware
    * Communication protocols
    * Communication with PLC
    * Communication with Data Acquisition System

    >> Connectivity between software
    * Communication with Excel
    * Communication with Visual Basic

    >> Commissioning the network nodes
    >> Troubleshooting the application

    Practical work and industrial projects

    Variable Frequency Drives (VFD)

    VFD HISTORY
    - Introduction
    - Semiconductors in VFD Design
    - SCRs / GTOs / Transistors / IGBTs / LSI
    WHAT VFDs DO
    - Motion Control / Motor Speed
    - Air Flow / Pressure Control
    - Liquid Flow / Pressure Control
    - Eliminates the need for:
    - Variable Transmission or Sheave
    - Variable Vanes or Dampers on Fans
    - Variable Valves on Pumps
    BENEFITS OF USING A VFD
    - Energy Savings
    - Easier Maintenance
    - Enhanced System Monitoring
    LOAD TYPES
    - Constant Torque – Conveyors, Positive Displacement Pumps, Superchargers
    - Variable Torque - Centrifugal Fans or Pumps, Saws, Routers, Planers
    VFD OPTIONS
    - Bypass - Two or Three Contactor Style, Disconnect Switch Style, Soft Starter
    - Fusing - VFD or Bypass Protection
    - Input / Output Reactors
    - Motor Overload Device
    - Transient Protection
    - Auxiliary Relays
    - Power Line Phase Reversal Detection
    INSTALLATION OF A VFD
    - Environmental Concerns
    - Clearances
    - Conduit Entry
    CUSTOMER CONNECTIONS
    - Safety Circuit
    - Start / Stop
    - Jog
    - Status Indication
    - Fault Indication
    - Remote Speed Reference
    - Monitoring of Motor Parameters
    WIRING & GROUNDING VFDs
    - Induced Signals
    – Inductive, Capacitative
    - Incoming Power (line) Wiring
    - Motor (load) Wiring
    - Control Wiring
    - Proper Grounding Methods
    CONTROLLING A VFD
    - Keypad Controls
    - Terminal Strip Control – Automatic, Manual
    - Bus Communication Control
    - Open Loop Control
    - Manual Operation
    - Automatic Operation
    - Sensorless Flux Vector
    - Closed Loop Control
    - PI Loop Configuration
    - Sensor or Transducer Feedback
    - Motor Shaft Encoder Feedback
    VFD SETUP, PROGRAMMING and TROUBLESHOOTING
    - Language & Display
    - Control Modes
    - Open Loop, Closed Loop
    - Motor Data
    - Motor Power (kW) and RPM
    - Voltage, FLA Current
    - Service Factor, Power Factor
    - References & Limits
    - Motor Speeds – Min, Max and Preset
    - Ramp Times
    - Speed Reference
    - Skip Frequencies
    - Limits for Alarms or Faults
    - Inputs / Outputs – Analog, Digital, and Relay
    - Application Functions
    - Reset
    - Flying Start
    - Sleep Mode
    - Switching Frequency
    - No Load
    - Phase Loss
    - Closed Loop Functions
    - Normal / Inverse
    - Anti Windup
    - Start-up Frequency
    - Integral Time / Differential Time
    - Proportional Gain / Differential Gain
    - Lowpass Filter



    Practical work and industrial projects


    Address: Suite 28, No 4 Irewole street,
    Awosika B/S, Opebi Ikeja, Lagos State, Nigeria
    Email: [email protected]
    website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

+ Reply
Page 2 of 5 FirstFirst 1234 ... LastLast

Similar Topics

  1. MCSE and MCSA Practical training...(one on one)
    By dafidi in forum Self Development and Training
    Replies: 0
    Last Post: Nov 3rd, 09, 03:51 pm
  2. We run Practical Training on ASP.Net,C#,VB.Net and SQL Server.
    By Celestine2009 in forum Archive and Junks
    Replies: 0
    Last Post: Oct 20th, 09, 08:25 am
  3. AFFORDABLE AND PRACTICAL TRAINING ON "THE ART OF PUBLIC SPEAKING"
    By Virtuez in forum Self Development and Training
    Replies: 0
    Last Post: Aug 27th, 09, 12:11 pm
  4. NIGERIAN WEB TECHNOLOGIES PRACTICAL TRAINING
    By kukujigs in forum IT Training
    Replies: 1
    Last Post: Feb 4th, 09, 04:32 pm
  5. Two weeks Practical Training: Web Design and Ms- Office Packages
    By saadmin in forum Self Development and Training
    Replies: 1
    Last Post: Dec 16th, 08, 08:14 pm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •