+ Reply + New Job/Topic
Page 3 of 5 FirstFirst 12345 LastLast
Results 27 to 39 of 65

Topic: Finite Element Analysis (FEA) Practical Training

  1. #27
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  2. #28
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  3. #29
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  4. #30
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  5. #31
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  6. #32
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  7. #33
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558,

  8. #34
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558

  9. #35
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558

  10. #36
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training
    Address: Suite 28, No 4 Irewole Street, Awosika B/S, Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558, +234 - 708 574 0887

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: +234 - 813 3476 558

  11. #37
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: 08055623360, 0708 574 0887

  12. #38
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: 08055623360, 0708 574 0887

  13. #39
    Senior Member stanhiz's Avatar
    Join Date
    Jan 2012
    Location
    LAGOS
    Posts
    2,965

    Re: Finite Element Analysis (FEA) Practical Training

    Finite Element Analysis (FEA) Practical Training

    Thank you for considering VOGW Concept LTD for your career growth and aspirations. We value your trust in us and appreciate the same. We offer you unparalleled training to nurture your skills for this challenging IT industry and a great learning environment. We appreciate your interest in pursuing your career in Design and softskills. Finite Element Analysis (FEA) SOLUTION APPROACHED

    Ø Introduction to Finite Element Methods (FEM)
    Ø Applied FEM - Industrial Approach Methodologies using FEM
    Ø Industrial Approach to Design and Validation
    Ø Element Formulation in FEM
    Ø Shape functions in FEM
    Ø Preparing geometry for meshing
    Ø Organising FE Models
    Ø Geometry Construction - Create & Edit
    Ø Repairing Surface Topology
    Ø Defeaturing models Transformation

    Advanced Methodologies in Structural Analysis

    Ø Structural Analysis
    Ø Linear Static Analysis
    Ø Thermal Analysis
    Ø Modal Analysis
    Ø Couple Analysis
    Ø Non-linear Analysis
    Ø Frequency Response Analysis
    Ø Analysis setup for various solvers
    Ø Bucking Analysis
    Ø Linear structural analysis
    Ø Spectrum analysis
    Ø Transient analysis
    Ø Fatigue analysis
    Ø Steady state thermal analysis
    Ø Composite analysis
    Ø Optimization analysis
    Ø Fluid Structural interaction

    Mesh Generation

    Ø What is mesh
    Ø Types of mesh in FEA
    - Mesh quality
    - Skewness
    - Smoothness
    - Aspect ratio

    Structural mesh topology

    Ø 2D Topology – H – Mesh, O – Mesh, C – mesh
    Ø 3D Topology – H-H, H-O, H-C, O-O, O-C, C-C

    Practical stress analysis

    Ø Stresses from simple components
    Ø Material behaviors and failure mechanisms
    Ø Fatigue and fracture
    Ø Heat transfer and thermal stress analysis
    Ø Simple component design
    Ø Dynamic Analysis
    Ø Harmonic frequency response analysis
    Ø Transient dynamic analysis

    Application Techniques (FEA)

    Ø Techniques of geometry modeling
    Ø Key points, lines, areas and volumes
    Ø Geometric construction
    Ø Simple Mesh Generation
    Ø Choice of elements
    Ø Element (material properties)
    Ø Element shape (tri/quad)
    Ø Mesh density (element size)
    Ø Automatic generation of FE model
    Ø Model optimization
    Ø Boundary Conditions Selection
    Ø Symmetry
    Ø Pressure surfaces
    Ø Solution & Post processing
    Ø Model database, results files
    Ø Plotting, printing etc.. Results
    Ø Analysis Checking

    Based projects using/Assignment

    Domain A. simple cantilever
    Domain B. Mohr’s Circle and state of stress
    Domain C. Analysis of a Beam
    Domain D: Design of Aircraft Structures or Design of Automotive Structures NOTE:
    Only ONE of the above mentioned domains will be considered, participants must clearly
    mention their choice of Domains in the modules.

    CFD solution approached, FEA solution approached concept may be considered as different area of specialization because of the in-depth knowledge of the fundamental of the topics.



    Eligibility:

    Engineers (B.E./B.Tech/M.E./M.Tech) in any of the following disciplines: Mechanical,
    Civil, Automobile, Aeronautical, Marine, Thermal, Chemical etc

    Perquisites: Knowledge of 2D and 3D modeling, ability to reason logically. Fluid mechanics and Stress analysis knowledge will be an added advantage.

    Duration:

    Classes will be conducted from Monday to Friday on an average of minimum of 3 times
    in a week for weekdays Track and Saturday/Sunday for Weekend Track.

    Starting date: Regular batch commences 1st week of every month

    Regular Track: 3 hours/day
    Fast Track: 6 hours/day

    Focus on area of specialization of participants while all topics are covered.
    Minimum Time Duration: 42 hours


    NB: Fee and conditions of services are subject to change without prior notice

    Course duration can be customize to suite the time frame of the participants

    Highlights of our courses: · 99% practical -oriented training · Live-projects based training Registration and payment: There are limited numbers of places in each course, so early Indication of interest is very important. Payment is required for confirmation of place. Participants are expected to register a week before the commencement of the training. Payment should be made to our bank account: To be provided on request. Class size: The training is design to accommodate few participants only Real life or dummy project(s) will be provided to test the participants’ ability to use the acquired skills to handle real life projects

    Address: Suite 28, No 4 Irewole Street, Awosika B/S,
    Opebi, Ikeja, Lagos State, Nigeria
    Email: [email protected] website: www.vogwconcept.com
    Tel: 08055623360, 0708 574 0887

+ Reply
Page 3 of 5 FirstFirst 12345 LastLast

Similar Topics

  1. MCSE and MCSA Practical training...(one on one)
    By dafidi in forum Self Development and Training
    Replies: 0
    Last Post: Nov 3rd, 09, 03:51 pm
  2. We run Practical Training on ASP.Net,C#,VB.Net and SQL Server.
    By Celestine2009 in forum Archive and Junks
    Replies: 0
    Last Post: Oct 20th, 09, 08:25 am
  3. AFFORDABLE AND PRACTICAL TRAINING ON "THE ART OF PUBLIC SPEAKING"
    By Virtuez in forum Self Development and Training
    Replies: 0
    Last Post: Aug 27th, 09, 12:11 pm
  4. NIGERIAN WEB TECHNOLOGIES PRACTICAL TRAINING
    By kukujigs in forum IT Training
    Replies: 1
    Last Post: Feb 4th, 09, 04:32 pm
  5. Two weeks Practical Training: Web Design and Ms- Office Packages
    By saadmin in forum Self Development and Training
    Replies: 1
    Last Post: Dec 16th, 08, 08:14 pm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •